here is a great turned out to me !! She did the first time, but it seems like now and you. we trailed) and so weave three spiral tubes, the diameter of the small wheel on twisted 1.5cm labial .a large wheel diameter of 3 cm (in a jar of acrylic paint TIP: each tube to take the glue otherwise imparting wheel will form like this … Here is my first wheel, everything fell apart (((and so weave a length of 29cm all three lanes, turn a wheel, we coat with glue the edges and that’s how I did (you can sew thread), but I took the ribbon and strongly bound, like this leave overnight We threaded tubes so as to get the “spokes” in small 4spitsy, a large wheel 6 do first rear axle, three tube bend (tubes) and sticks to the inside anchoring thread tails and connect the wheel thread again take 3 tube connect crisscross and connect front wheel: 6 tubes take conventional threaded to Sredinka and connect on both sides ie, left and right they put on another 3 tubes connect and entwine thread tube we do plug second and anchoring, and the tails are driving We put on another 3 tube in place of the plug connections, anchoring thread weave knob on the steering wheel 9cm share entwine and put on glue Here frame plus.soedinyaem and begin to wrap the entire frame
as my daughter says FIDALIKI)))) take the tube on the front wheel, divide by 2 pieces form a triangle and entwine, tails I cut off white paint, dry them He wove this basket’s front will hang on the handlebars something like that and here is another I wish you success in the work, I hope has been useful for you!
DIY: Swan Succulent Planters
I don’t think I’m alone when I say that succulents are some of the few plants I can keep alive. I love all the cute little succulent varieties, and I can’t help but add to my collection. Another thing I’ve been collecting are these miniature swan favors. I’ve found different sizes and shapes at discount stores and thrift shops, and they are too adorable to leave behind. The finish on them is usually a bit tacky, though, so I gave these beauties a quick makeover and turned them into planters for my little succulents. Right now, I have these lined up along my windowsill, but they’re perfect centerpieces for a spring gathering, too. Or keep them as favors and give them as gifts to your party guests!
Supplies:
-Plastic swan wedding favors (similar styles here, here and here)
-gesso primer
-paint (and metallic nail polish)
-paintbrushes
Step 1: Prime the outside (and inside, if desired) of the swans using the gesso primer. Let dry completely.
Step 2: Paint the swans black or white over the primer and let dry. Step 3: Use a fine paintbrush to paint in the beak and eye details. I used metallic nail polish for the beaks. Let dry. Step 4: Pot your succulents into the planters. I used a piece of foil to line the cavity so that the succulent wouldn’t be sitting on a painted interior. You could also use a small vessel like a disposable plastic shot glass and poke holes in the bottom if your plants need more drainage. Or just poke holes in the bottom with a needle or thumb tack. Or if you don’t have a green thumb, fake succulents would work, too!