Get Daily Art and Crafts Ideas & Tutorials…
The space between the contour smeared PVA glue and then bombarded the desired grains. Translucent rice on top of more sprinkled colored sand, which remained from the picture-bought “semi-finished”. Thus obtaining a light blue, red and brown.
Attach the sails to the newspaper ducts.
Required Materials:
– Role of two different colors, preferably thick
– Cardboard
– Painting
– Scissors
– Glue
Procedure:
Step 1: This little pig is always performed with the same piece. That is; you will create 350 pieces of this type. You sufficient follow photos.
Step 2: Once you have made at least half of the pieces, it is time to put them together. Each row consists of 23 parts.
Step 3: When you have reached the sixth row, you must reverse the way in which the pieces are placed.
Step 4: Once you have added six more rows, you must create the ears. In this case, begins is five pieces, and then 4 ends 3.
Step 5: Now just must draw on cardboard muzzle, eyes and pig wings. Cut them out and glue.
We need:
Let’s start with the body.
Putting 2 rows of 10 modules, make a chain.
3 series of 20 moduley.Odevaem way (picture shown in a different color).
4,5,6,7,8,9y ranks dress ….. 20 modules in each row.
In a series of dress 10 m 3 modules typically ray of a 2 by 2, 3, usually 2 2 ray of, etc. It turns out 25 pieces. in the row.
11,12 and 13 in the series of 25 modules, 14th series of dress 18 modules, 14 ray of reserve.
Next to these 18 dress 17 modules, and then again 18, then 17 and 18y number again 18 modules, 19 series of 17 modules, 20y- 18 modules.
I do so, leaving a hole in the trunk for hvosta.Vy and can not bother to wear until the 21st series of 25 modules.
21 and 22 series in 30 moduley.Vot so looks a hole in the trunk.
23rd series of dress one ray of module 3, poluchaetsya 20 modules ryadu.Po middle one pink dress.
In the 24m row 1 module pink dress pink 2, the other 18 blue.
25th number 1 pink, 19 sinih.Odevaem way.
Our body is ready.
We proceed to the neck.
Putting 4 ryada.V first row of 8 modules, a second series of 9 modules, the third row again 8 modules, the fourth series of 9 modules, the center 1 pink.
7th series of 10 blue.
8th series of 8 blue, 1 pink.
9th number 10 blue.
10th series of 8 blue, 1 pink.
11th number 10 blue.
12th series of 8 blue, 1 pink.
13th number of the first module of a three ray of the second, too, three ray of 4 module typically, 7th module as well as the first ray of a three and three-eighth ray of. Thus, among the leaves 8 modules.
14th number again reducing, 1 pink dress in the usual way and 4 blue on the sides of each ray of three. Leaves 5 pieces in a row.
15th number 6 blue dress as usual.
16th number 1 pink, 4 blue.
17th number 6 blue.
18y number 1 pink, 4 blue.
19y number 6 blue.
20th number 1 pink, 4 blue.
21y number 6 blue.
22nd row 1 pink, 4 blue.
23rd number 6 blue.
24y number 1 pink, 4 blue.
25th series make the cut, 4 blue dress.
26th number 1 pink in the center, 2 blue on the sides.
27y number 4 blue.
28y number 1 pink, 2 blue.
29y number 4 blue.
30th number 1 pink, 2 blue.
31y number 4 blue.
32nd number 1 pink, 2 blue .
33rd number 4 blue.
34th number 1 pink, 2 blue.
35th row 4 blue.
36th series of pink in the center, 2 extreme dress every 3 luchika.Takim way out in a series of 3 shtuki.Sverhu on them in the middle, 2 blue dress.
Neck ready.
Now head.
Take the 13 units, 13 more top dress, but the short side of the module naruzhu.Kazhdy better prokleivat.
holding the edges to turn out blank.
The third and fourth series of 13 pieces each.
In the fifth row we add 4 modulya.Odevaem 3 modules as usual, 2 modules in the ray of 2, 3, as usual, the ray of 2 to 2, etc. At the other photo shows tsvetom.Vyhodit 17 pieces in a row.
In a series of 8 blue 6m modules, 1 green, 7 blue, 1 green.
The 7m number 2 green, 7 blue, 2 green, 6 blue.
In the 8th row 1 green, 1 pink, 1 green, 6 blue, 1 green, 1 pink, 1 green, 5 blue.
9th row 2 green, 3 blue, 1 yellow, 3 blue, 2 green, 6 blue,
10th number 1 green, 3 blue, 2 yellow, 3 blue, 1 green, 7 blue;
11th series of 3 yellow, the other blue;
12th series 4 yellow;
13th series of 5 yellow;
14th series go to umenshenie.Odevaem 4 yellow, every ray of module 3, blue dress like obychno.Vyhodit 15 pieces in a row.
15th row 5 yellow, 2 blue dress on the sides as usual, and 4 blue dress from the bottom every 3 luchika.Vyhodit 13 pieces in a row.
And the last, 16th ryad.Odevaem yellow 4 modules, each ray of 3, 7 as the blue obychno.Golova gotova.Oformim later)
We proceed to the tail.
Collect 3 ryada.V the first 19 units, the second series of 18 modules, the third 17 units.
!!! Each module prokleivat PVA better, but in this case the tail once, during assembly, it is necessary to curve shape.
4th series of 18 yellow.
5th row 1 blue, 1 yellow, 3 green, 1 yellow, 3 green, 1 yellow, 3 green, 1 yellow, 3 green, 1 yellow, 1 blue.
6th row 1 blue, 1 yellow, 2 green, 2 yellow, 2 green, 2 yellow, 2 green, 2 yellow, 2 green, 1 yellow, 1 green siniy.Mezhdu a pink paste.
1 blue, 1 yellow, 2 green, 1 yellow, 1 blue, 1 yellow, 2 green, 1 yellow, 1 blue, 1 yellow, 2 green, 1 yellow, 1 blue, 1 yellow, 2 green, 1 yellow, 1 blue .
1 blue, 1 yellow, 1 green, 1 yellow, 2 blue, 1 yellow, 1 green, 1 yellow, 2 blue, 1 yellow, 1 green, 1 yellow, 2 blue, 1 yellow, 1 green, 1 yellow, 1 blue .
1 blue, 2 yellow, 1 blue, 2 ray of missing, again one blue, etc.
on top of the yellow dress one yellow, one on each side of the blue.
Top two blue on them one by one.
Make peryshki.Odevaem 1 blue, 1 green, 1 blue, 2 on top of the blue, 1 green on them.
Next to the green, one blue dress on a blue ray.
Top two green and blue on the sides as in the previous ryadu.Sverhu one yellow to green, flanked by the green and one blue.
Top 2 green, next to the blue.
Next 1 green, next to the blue and top them sinih.Delaem 2 of 3 more.
Now green peryshki.Odevaem one module 2 blue green, then one again, 2,1,2,1,2.
Dress 2 green yellow and one on each side of the green, then yellow, and the top two on the sides of the green.
In the center of the blue near yellow, flanked by two blue zelenye.Sverhu next yellow on the sides of the green.
Then dress the center 1 pink, next to blue, then yellow and sides zelenye.Sverhu 2 blue, 2 yellow, 2 green, then blue 1, 2 yellow, 2 zelenyh.Posle 2 yellow, 2 green above 1 yellow, 2 green , 2 green top and the top 1 of 4 zelenyy.Delaem.
Nearby peryshki.Odevaem 2 blue, they are green, two blue, green, 2 blue, green.
On each side of the green 2 blue, 2 green on, 2 blue, above the yellow, 2 green, 2 blue, 2 green on, 2 blue, still above the green and 2 blue, 2 blue above, the uppermost one of siniy.Delaem 3.
On the lower two feathers that in the center, dress 2 blue, 1 green, 2 blue, 1 green.
Making 4 arochki.V one arch modules 5 on one side, five on the other and one in the center.
Top blue dress.
In the center of a pink dress 1, 2 above zelenyh.Posle 1 yellow, 2 green, then 2 yellow, 2 green after 1 pink, 2 yellow and 2 green.
Then, on top of 2 yellow, 2 green above 1 yellow, 2 green, 2 blue, 2 green after 2 blue, then 1 green, 2 blue, 2 blue and on the tip 1 siniy.Takih 3 pieces.
And here is our little tail))
That’s all detali.Prikleivaem beak, eyes, hoholok.Soedinyaem all parts with Thermo)
Our peacock 🙂
How to make coffee bean clock
hours, was born from a great love for coffee and chocolate 🙂
Thus, the coffee and the sweet tooth will need:
– Preparation hours under a coffee cup. My size is about 17 * 22 cm;
– Napkin in a coffee theme + brown or maroon monochrome napkin;
– Clockwork;
– Acrylic primer, varnish, paint brushes;
– Acrylic paint: white, brown;
– paper towels;
– polymer clay;
– Potal and glue Potali;
– satin ribbon;
– coffee beans;
– Melt;
– PVA glue;
– Foil.
I inspect the workpiece, looking for defects and fillings eliminate them. After drying the skin. On my billet was more master ordered 3 small holes on nizu- for greater beauty, decor
Then, in the course is the ground, I put or render it with a sponge.
The soil dries very quickly, and check if everything is dry, skin in 20-30 minutes. The next step – applying acrylic paint with a sponge or sponge evenly in 1 or 2 layers with drying. The paint I take in DIY stores: waterborne acrylic for interior use. 0.8-1.0 kg buckets on long enough.
On my watch, two coats of acrylic paint well dried and now akruratno, without fanaticism hides. We need a perfectly flat, smooth monotonous white surface. The skin initially the average grain size in the end, a smaller, more gentle
I picked up a napkin here: solid coffee with a small inscription. My billet quarter cloth covers not fully, the handle on the big cup, I rep later.
I’ve found method allows to stick a napkin neatly, without folds or tears. The top layer of paint wipes placed face down on the file and poured a puddle of water. While the water is distributed on a napkin, dabbing her napkin neatly straighten slightly stretched it sideways. The fingertips are helping to do this quickly, but carefully.
This master class want to show how to decorate the house for tea made of plywood under the forest izbushechku without using decoupage. Master Class Time is suspended, without time to dry.
When I received and gathered her hut, her bokovinki simulating log walls, immediately created an image of the fairy house in the forest, hidden amongst mountain ash and fir trees. This idea I decided to translate. We need: purchase house from plywood, water stain (I have the color mocha) for wood, textured paste, PVA glue, acrylic paint (I korichnevvaya, carbon black, bronze), glass paint, sandpaper with different grits, masking tape, stencil acrylic contours, brush, palette knife.
Before you begin any of collecting house and see that all the slots close to the end into each other. If something somewhere bother finalizing a file 🙂 It is advisable to remember or mark which wall from which a party to avoid confusion in the future.
Mordant for wood, I chose to paint just because of the fact that it attaches to the workpiece color of natural wood, leaving visible its “structure” (or rather, the name of this “structure” in plywood – I do not know, in general, these beautiful, “natural “streaks
After drying the skins to properly collect and smoothness house. PVA glue construction wall between himself and the roof. I’m on the floor until pasting, for the convenience of further manipulation, but at the time of bonding of the floor wall insert so that they are not twisted. I fix the masking tape and rubber bands. I do not know how anyone, but I prefer a thin glue on the edges of the cracks and distribute a toothpick and spicy flat nail file 🙂 left to dry for several hours.
Here, at the Fair, I met with a magic effect “glow” in the decoupage works of some artists, and have long wanted to try to apply it by hand. To do this, at the center of each face of the house and the roof I carefully hides, blowing out:
Then again, the whole house cover with stains, land and again the skins – the edges slightly, the center is strong. And so do a few times, until we reach the desired effect.
Now we go to the application of decorative elements. Rowan mountain ash, but it I decided to do some framing patterns. I really like to do the bulk pattern texture paste. On the one hand this pattern stands out due to its volume, on the other – not too flashy and will not interrupt the main figure due to its color close to the color of the house. We spread the texture paste in a glass, add there a little acrylic paint, I took the brown and carbon black, so that in the end turned the color slightly darker edges of faces.
Impose a stencil (I Adhesive) and causes the paste is not too flat and not too thick. Spatula for some reason it is not convenient to apply, I put a stick for ice cream
A few hours later, when the paste is dry, lightly brush the paint on the plot the bronze pattern:
At this stage we can already stick to the base of a house.
Getting acrylic painting contours. You can pre-apply pencil drawing, I draw once: first osnovyne elements – green twigs and red-orange berries (such as on the roof), then supplement highlights (bronze circuit) and shades (brown contour) – both on the wall of the house.
The two sides have I done with rowan, the front and rear wall has decided to do with pine branches. To use real pine cones can be. I cut them in half with a knife, choosing the appropriate items.
Please outline the location and paste the bumps. So they stuck close, grind and align the direction of bonding bumps skin. Then dorisovyvat pine branch. First again osnovyne elements – green branches and needles as they dry out a bit, complement other flowers, dried needles bronze color.
When the paint dries, pass stain again over all edges of the house, including the bulk ornament, leaving intact the main pattern to further highlight the effect of “glow” from the center faces. The whole house is covered with lacquer in several layers with drying of each layer.
Forest hut ready! To enhance the effect, you can drop of essential oil of fir, spruce, pine or cedar.
