Vase with flowers – Mother’s Day Gift (Tutorial)

Mother’s Day gift – flower vases made in the art of paper cutting.

Long I stare at work Zulfiya Dadashov. Not so long ago bought a knife for cutting, tried to cut a Christmas tree for its MC. Cut I liked it, so I decided to do the work for the competition in this technique.

Author template:

Required Material:

  • paper white and pink,
  • knife for cutting,
  • a ruler and a tool for creasing,
  • scissors,
  • shaped punches,
  • glue,
  • pencil,
  • ribbon, rhinestones.

The finished scheme did not seek, I decided to draw itself. I admit, it did not work the first time.

He translated his drawing on thin paper and secure it with a stapler on white paper to cut, folded in half.

Cut parts with a knife. As the experience in the cutting I did not so much, it was hard to cut curved elements.

Then cut out the contour of the vase.

Based vases necessary to line 3 (probigovat) and folded on it, for the construction stability.

Top between the two halves of the vase paste leaf and cut it in a semicircle. This place is a decorative elements – flowers.

For the manufacture of each flower will need 3 different sizes of paper square. You need to add these squares in half and draw half of a flower.

I cut blanks for 5 flowers. Unbent their petals. And then glued blanks flowers with each other.

In addition the finished flower pasted dyrokolny little flower.

Next, the leaves made by a hole punch. And sticking them on top of the vase (pasted on a sheet).

After this has placed the flowers and glue them.

Midway flowers can be decorated with rhinestones.

At the bottom of the vase tied bow, covering only one half of the vase.

Hope you like this tutorial.

DIY Beautiful roses from watercolor paper – Step by step

Beautiful roses can be made from the watercolor paper . The color scheme can be very different, and the use of such flowers in the decoration.

The paper – Whatman “Gosznak”.
These flowers I do of Korean paper, but in the master classes of special use drawing paper, so that you quickly determine the paper.

Prepare a lot of parts, score the petals fold stack. Take a spray bottle and spray water between the layers. Knead the stack of paper, like a slice of dough for dumplings. Periodically check the middle, it is necessary that the paper is soaked in water.
Or the second option – fast. Place a stack of paper under running water, dip a layer. Remove from the water. Use your fingers to distribute water, soak again until the paper gets wet completely. The second option I like the most 🙂
Not very pressing with a wet paper proceed to the next step.

PS: Who has difficulties with the purchase of a composter 5cm, use the template.

The small amount of water dilute the ink. Or sponge type paint with a pad, dip in water and wring out. You can use the printer ink.

Sponzhem (I cosmetic) promakivat movements (such as “Peck, Peck”), color seredinku upper layer stack, set aside, and then the next layer. Thus, gradually shifting into the second half stack of color. Do not be afraid of the excess water and flimsy parts.

Take the second half of the unpainted parts and barely touching the edge dip into the paint.

Painted stack parts mash fingers, evenly distributing the paint. Check the middle, if the paint is distributed poorly, squirts water spray between the layers.

Zakonchiv staining, good water press fabric.
Clutching a stack to one side, dry the hair dryer parts on all sides until almost dry. Do not use a hair dryer to embosinga.

Detail fold. Collecting accordion, make folds.
Hold fingers detail about the middle, hold the edge of the tweezers. Gently rotate only the tweezers until the paper does not slip out of it. If the paper is torn, the more dry the parts hairdryer. Conversely, if the fold is not laid soft – moisten.

Adjust the folds, holding fingers area.

Gently flatten the piece and leave to dry.

When the first deferred parts dried up. can be specks.
Take the ink pad black. Better ink resistant to water. Brush with a short stiff bristles (I from the vacuum cleaner to clean the filter can be pulled out of the tuft brushes).
Vertically holding the brush, make a point movement specks.

While the details have not yet dried completely, use the line with circles and tools, make an indentation in the center, dropping petals on the line.
Leave the parts to dry completely.

Glue the parts, pressing tool in the center.

Make a hole awl. Fold the stamens in half, using a wire.

Drag the stamen to the middle of using the line with the hole, so as not to deform the flower. Apply the adhesive so that then cut the excess, stamens are not dropped. Lower stamens to the desired length by gluing them to flower.

That this result was stained in the center and on the edges. The options really are so many and each flower is unique. Do a lot at once, in stages, it is very convenient and much less time than if you make one flower. The process is very exciting and challenging, boring only stamens inserted.While I was preparing for the master class, so I absorbed that made a huge bunch of flowers for 3 days – 236 pcs. Enough for a year or two 🙂

Keep flowers convenient threading a wire through the eyelets of the stamens. For works by suitable simply cut off.

Hope you like this tutorial.

How to make a bouquet for mom – Step by step

A bouquet for mom: Mother’s day special handmade gift for mom.

Materials and tools:

  • Printer paper or colored paper
  • Stationery knife
  • Scissors
  • Glue stick
  • Stapler
  • Ruler
  • Pencil

Cut a square of paper 3 10×10 cm.

The stapler fastening them together at the corners.

Draw rounded corners.

Draw a spiral. The width of the spiral coil approximately 2 cm.

Draw helices on elements for cutting.

Getting cut.

Cut the spiral.

cut corners.

Get 3 equal parts.

Make rosettes.

For the leaves need to cut out a rectangle of 10h16 cm.

The folded in half along the long side.

Draw a shamrock and scrapie nesolkih paper in places where there is no pattern.

First cut leaf veins.

Then – along the contour.

Take the size 9h16 cm paper.

Displace shaped horn and glue edge.

Glue 3 flowers together.

Glue the leaves and flowers.

Thanks for visiting our website.

Paper Quilling – How to Make Key chain from Quilling Art

In this tutorial you will learn how to make a beautiful paper quilling key chain at home just in 4 minute. You need not to be worry if you haven’t done any paper quilling activity before,you will find this video quite simple. You just need to follow easy steps. Making key chain with paper is one of the best quilling ideas you will ever find! So, what are you waiting for? Let’s get started.

Material Required:

  • Quilling Strip
  • Slotted tool
  • Comb
  • Key Ring
  • Glue

Steps:

1) Take one quilling strip and roll it on comb tooth (as shown in video)

2) Now, fold that design into half and paste another quilling strip on it as done in video.

3) Repeat above steps for more design.

4) Now, take 3 quilling strip of different color and roll it using quilling needle.Paste all the petals on that circle to form a flower.

5) After pasting all the petals together,cover that flower with another quilling strip and hang key ring on that flower. (as shown in video)

You Can Watch the Video Tutorial

Your beautiful DIY paper quilling key chain is ready. Hope you liked it. Stay tuned for more crafting tutorial.

Everyone loves to keep beautiful key chain. How wonderful it would be to make your own key chain at home! Crafting Hours brings you this exciting DIY Crafts activity on paper quilling to help you learn how to make key chain with paper!

DIY Folded Paper Bracelets (Tutorial)

I remembered a fun way to use it. Cleaning out some paperwork I came across an ancient photocopied sheet of instructions for making folded paper bracelets. I remember making these as a teenager, and I knew my kids would love to transform their paintings into wearable art so we got out the pile of paintings got to work!

To make a folded paper bracelet you need to begin by cutting lots of strips of paper.

Source: picklebums.com

How to Make a Origami Kusudama Flower

Today, we are showing how to make a origami kusudama flowers to create a very special centerpiece.

Required Materials:
  • Coloured or origami paper
  • Double sided tape
  • Wooden brochette skewers
  • Glue

1. Cut paper making squares of 10 cm.
2. Fold squares diagonally.
3. Fold as shown in step 3 and 4 to make a square again.
4. Follow step 5 and 6 to make a figure as shown in the picture.
5. Follow steps 7,8 and 9 until you get to the figure shown in step 10.
6. Fold upper triangle on each side of the figure and tuck them well into the folds of paper, as shown in steps 11 and 12.
7 Now it’s time to fold again inwards, followin steps 13 and 14
8. Stick a little piece of double sided tape on one end and join it to the other. You will get a petal.
9. Do last instructions again 5 times and stick all petals together to make a flower.
10. Stick flower to a wooden brochette skewer and you’re done!

For leafs:
I used 2 mm wide strips, 2 shades of green for each leaf (120gsm combined with 80gsm). You will need very long paper strips, 40cm up to 80 cm, so glue 2-3 strips together before you start to weave them around the pins.
This quilling technique is called “husking”. Insert your first pin into the cork board and secure the paper strips by making a tiny loop. Insert the next pin and bring the paper strips around it, making sure to always add glue at the base of your first pin every time you come back to that point. Repeat the process until the desired grass leaf length is achieved.

Beautiful Pendant Mobile Ideas

Collection of beautiful pendant mobile ideas to decorate any room. You can make similar pendant with their hands. Whether it’s a pendant light, a mobile if it’s cool and it hangs from the ceiling, it’s probably in this roundup. There are a lot of great ideas that would be perfect to try over the long, upcoming, Labor Day weekend. So ‘let’s hang out’ and go through this list of 18 hanging DIY ideas to see what inspires you.

DIY Chandelier Made Out Of Paper

You’ll need a whole bunch of paint swatches in your desired colours (seriously, emphasis on the whole bunch part). I picked a variety of blush, pink and red hues so I could get a fancy ombre look to my chandelier but I can only imagine how many different looks you could go for with your own chandelier. Using a scalloped paper punch you’ll need to punch about 40 -60 swatches into little medallions. Keep the medallions divided by colours in little saucers or cups like below. I bought my lamp shade (my chandelier base) from Lowes for about 5 bucks. Using an Exacto knife and super sharp metal scissors I carefully cut apart the fabric lamp shade, peeling away the pieces until the metal parts were as exposed as possible. When picking out a lamp shade I tried to pick out one where the bottom diameter is much smaller than the top. This will make your layers of paint swatch medallions hang better and thus look much better when the final product is done. Lay out your paint medallions, coloured side down, in the desired order. Tape down a long piece of coloured thread along the middle of the backs of each medallion. Then using a piece of tape, cut down the center width wise, tape together the edges where one medallion meets the next. Without this final piece of tape, the medallions with rotate on their piece of thread, thus showing the bar codes, text and colour names usually located on the backs of the paint swatches. If that doesn’t bother you then this step isn’t necessary! Repeat this step until all of your chandelier strands are strung and taped together. Flip your lamp shade upside down and fasten it somewhere where it can hang freely (I tied mine to the latch that opens and closes our air vent in our ceiling). Start stringing on your strands along the perimeter of the bottom of the chandelier until the entire metal base is covered. Then start stringing strands along the widest ‘top’ of your chandelier so that the lowest part of your strand hits the mid point of the bottom layer. Continue this all the way around until the entire chandelier is covered. Add a ribbon to the metal pieces (where the light bulb would pop in) and voila! You’re ready to hang this beauty!

How to Make an Basic Explosion Gift Box

Basic Explosion Gift Box: Today, to share the basic gift box production process, need to prepare the material is very simple, but as long as coupled with your creativity, you can make a new full of full, unique gift box!

Required Material:

● ruler, crimping pen
● scissors, utility knife, cutting pad
● double-sided adhesive, round
● A sheet of 39 * 39CM paper is made as an outer layer
( the paper on the outer layer is as thick as possible).
• A sheet of 23.5 * 23.5CM is made of a sheet of paper
• A sheet of 36 * 36CM is made of medium
● A 33 * 33CM paper is made of inner layer
● Decorated pattern paper and ribbon

Step1.
Take the first 39 * 39CM paper to do the outer layer, each side is divided into three sections 13CM painted Jiugongge, four corners of the square to draw a line. Step2.
Take a 13 * 13CM paper on the folding cut a love as a model, in the four corners on the mark, the extra part of the cut off, folded in accordance with the fold line, coupled with the decorative love, the outer layer to do The. Step3.
Part of the cover to remove the 23.5 * 23.5CM paper, the inside of the 5 cm draw line, the figure will be removed part of the slash, in accordance with the polyline will be four sides stick together, the lid is completed.
Step4.
Then we have to do the middle part of the pocket, according to the size of the figure to draw a broken line, a good direction to cut four knives, after folding with double-sided adhesive bonding; bonding will find two grid side will grow a little, so the long sides of the cut, the middle also completed!
(you can also use the shape of a puncher for decoration)
Step 5.
Remove the 33 * 33CM paper, draw a pencil to draw each section of the 11CM Jiugongge, the four sides of the square to remove, and then chamfer chamfer; Finally, all the parts combination, and then tied to the ribbon, the basic The gift box is finished!
Source

Handmade lantern making tutorial

A symbol of the festive and children together to produce a fine and simple lanterns! A very beautiful handmade paper lantern Oh! Ready to the required materials, to produce this Pupils handmade lanterns!

Step 1

Prepare two colors of colored paper, and cut them into a square, large sheets of small square should have, as shown, and a large rectangular white paper

Step 2

Cut all the edges of the square into a jagged shape, as shown in the figure, note that the lace should be consistent,

Step 3

Wrap the large square and the back of the small square with each other and then roll them up as shown

Step 4

Will each roll up the roller paste fixed in a row, and then fixed in the white rectangle, up and down to leave a side

Step 5

Cut out some flowers with embossing machine or scissors, the best size of the flowers do not differ too much

Step 6

Will cut the small flowers attached to the reel in the contact point, and then paste the gold color on the edge of the upper and lower

Step 7

The crepe paper or colored paper to expand the folds, and then cut into a tassel-like, pay attention to the top of a margin

Step 8

Will cut the tassel paste in the bottom of the inside, the other cut a long strip, and then paste in the top of the inside, make lanyard

Step 9

Will be rolled up the whole step into a lantern-like, fixed, you can hang in the favorite place!

Another lantern with different color:Source