Posted on

How to make ancestral castle – Step By Step

ancestral castle 1
Required Materials:
Cardboard,
newspaper,
PVA glue,
salty dough,
Any paint
Matt lacquer.
Scissors,
knife for cutting cardboard and all your existing tools for sculpting.
Dough:
A cup of flour,
Extra cup salt,
4 tablespoons of PVA
minimum of water.
The dough should be dry, but do not crumble. In the refrigerator at least an hour.
When modeling, if the batter dryly, hold it a little bit in their hands, and if sticks, hold it open to the air. Perfect dough is rolled out to 1 mm.
Find on the Internet that you want to dazzle, whether it is a bug or a castle. The picture is advisable to keep in front of you, in an ideal – a few angles. You can sculpt and .. head, but then a lot will have to correct.
Future wall.

Main entrance.

Merge newspaper.

 We form an arch and separates it for easy modeling.

We begin to mold pre-moistened cardboard PVA or water.

 Increased depth. Sculpted head.

We make an additional input element.

Front view.

Back view.

The final form.

The height of the walls have increased due to the increase of the entrance arch. He added an extension at the rear. Sculpted as input. Windows is desirable to draw the cut and after drying.

 Side view. The reference table under the tower.

Back view.

Lepim tower. Lateral.

Upper.

 Rear.

 Install the rear tower.

 Install the front arch.

We begin to sculpt the roof.

 The side roof elements.

Install the roof.

Install the side of the tower.

Making tents. Bag filled with dough.

Putting the top of the tower.

Let’s see what happens.

Add side tents. English lawn and coat of arms.

You are invited to a ball in the evening.

Posted on

How to make broom out of plastic bottles

broom out of plastic bottles 1

Tools and materials:
– plastic pre-baked the rope for greater rigidity 20 centimeters long, each piece;
– 88 universal glue;
– Cut the neck of a plastic bottle;
– Sided twist;
– A cover from a plastic bottle 8 pcs .;
– Screws 7 pcs;
– Screwdriver;
– A piece of wood – the basis for the pile of brooms.
We need a 20-centimeter plastic rope tight squeeze and trim. That they were all on one level. And tightly holding them with one hand, pull on one end of the cut-out in advance of the neck of a plastic bottle. It will serve as a holder. If formed unevenness in the distribution of plastic rope, then tap the edge of a pile, equating it to a piece of wood.

Then you need to put a two-way twist on this pile. Carefully dress, gradually pushing the neck of a plastic bottle, which now we do not need, and remove it.

Now also trimmed edge of the bar, so that they are flush with the spin base. And deepen the twist in 5 millimeters deep.
Now we take the glue 88 universal building and pour over the depth of plastic rope. But not too much. We need to stick together villi. And twists the ordinary plastic cap from the bottle, and pushes the rope all the way into the lid. Tap on the bar, and even trim. Now the cover can be removed and again to deepen to 5 millimeters.

Such preparations must be made 7 pieces. The manufacturing process is the same everywhere.
Now we get down to the bar itself. To him, the same distance should be bolted 7 caps from plastic bottles. In the middle of the lid drilled hole to insert a screw with a screwdriver and it is screwed into a bar, pinning thus cover. The lid is secured screw part up.

Now, each cover must be screwed into every blank for a broom. Now these are a pile of stiff brooms ready.

Posted on

DIY Old T-Shirt Carpet

old tee thumbnil

Simply gather all those old, pretty t-shirts that you don’t flaunt anymore, but find cute enough to hold on to, and get going with transforming them into a cozy and beautiful round carpet.

Posted on

How to make cute textile doll

textile doll 1

Patterns fit on a sheet of A4. When cutting is necessary to add 0.5 cm at the seams

Cutting, stitch

In this section you need to cut to make crosscuts, before reaching the seam of 1-2 mm

on the concave curvature is also desirable to make several crosscuts to seam is not tightened when the person will turn on the

tack foot, then stitch

in the hole on the back foot right now invest

on a typewriter here does not crawl, so sew on their hands, more often

I sew the legs so that even had the opportunity, unnecessarily. I have a standing doll

Plastivy bottle of shampoo is useful to us. Cut 2 strips

We put in the back, instead of a well-kept pozvonochnika.Golova

Fingers to stitch thread

Head sew

Hands sew thick strong thread

Knit cap from one yarn from which the hair will be. Sew, leaving the place where you can still that the head did not seem flat

hair attach with a hook

is not enough yarn.Nado search or work something out with headdress

That’s all. Nothing slozhnogo.Shila just four dolls, so the pictures appear one with ears, you will excuse me

Posted on

How to working with glass for cabinet doors

glass for cabinet doors 1
How to working with glass for cabinet doors:
Today I’ll show you how to decor elements help from fusing to decorate the interior,
it can be any cabinet doors, mirror, tiles or window,
this will require the case, the new items that you can buy from me in any quantity and desired color scheme and glue.
I bake them of arbitrary shape, you need to put your own picture,
all who are able to come up and draw a branch with flowers, it will not be difficult!
Only imagination !!!
All photos were taken a year ago when I repaired my apartment and preparing for the decoration of kitchen units, so do not be confused by some of the details …….
in the photo clearly shows that the kitchen in the process …..
so look “parts”

 and such!

Further,
I had 4 glasses,
almost simultaneously laid out drawing

Whatman is under glass, on a white background layout makes it convenient, but it is an old sketch,
it did not pay any attention,
again I note that all took place in the “martial repair conditions”
that was at hand, and then went to the cause, even the glasses are not on the table, and removed the door!
it was my table a few months ……
and stood on the boxes with things !!!!

the whole picture, I first laid out, and then pasting.
Use professional adhesive for glass UVR,
it can be replaced by a transparent adhesive or sealant for glass

all is ready!!!
glass furniture manufacturers have given,
they inserted them into the doors and lockers ready brought to the assembly.
………. Slightly “missed”:
TIP !!! better to make glass with the back of the mat, as everything inside and then knocks,
I came out of this position by gluing the back matte film.
and so…….

beautiful, and most importantly you will not be bored interiors!
Let your home be sure with his zest !!!!!!!

Source: liveinternet
Posted on

How to make imitation bricks on the bottle – Step by Step

imitation bricks on the bottle 1

You will need: a bottle filler, putty knife, a match or a toothpick, sandpaper (the smallest), acrylic paints.

Remove from the bottle label, bottle decreased and begin to work. Apply the filler with a thin layer of approximately 2 mm.

Level the surface with a spatula. With a toothpick or match conduct by the bottle line, which imitates the brickwork.

After complete drying of the coating will be overwritten by sandpaper.

Now we put a sponge acrylic brick color in 3-4 layers.

Once dry, paint the bottle of white acrylic paint – 1 layer

Again, we pass our brickwork skin.

That’s the result! And now you can use decoupage napkins or just varnish bottle

Posted on

How to make a ship from newspaper

ship from the newspaper tubes. 1

Required Materials:
– Newspaper tubes
– Gafrokarton
– Electrodes
– Transparent glue gun
For starters are forming a bottom. Cut from two pieces and glued together, then pressed his press.

Cut out two more pieces of the same shape, but slightly smaller and gluing. It will bottom.

Cut out more Fourteen pieces of eight-by-ten centimeters and glued together seven pieces.

Paste them on top of the bottom.

Turn it upside down and press down the load so that it is better to stick together.

Takes two electrodes and they pierce the deck.

Then wrapped with newspapers electrodes.

Poured into the holes from the electrodes hot glue and insert to the electrodes.

Then embark on a weaving. Insert the tube into the bottom.

Pick up small stands.

Weaves a string four rows of two tubes.

In the fifth row and add a third straw weaves a rope of three tubes.

Propletaete few more rows to twist got out on deck. Getting to the weaving poles.

Two tubes twist around the electrodes. Then you make the observation basket. The author has shown two options. First, you can start to weave a piece of string around the remaining tubes.

The second option is to wind-blown tube around the electrode.

At the stern using toothpicks are doing holes.

Then pour in the hot glue them and insert the tube.

Now leading tubes weave only the stern.

Deck Wallpapers light tubes.

On the nose put another electrode and wrapped his brown tubes.

Then start weaving the bridge.

Skirting beautiful finish crimping of the two tubes.

Like this, as the author pointed to the picture should look like a ship.

A proplatelet couple of rows, and then paste a piece of cardboard.

Top cover her with boards of tubes.

Front ends of the column.

At the rear are building a railing.

Cut off all unnecessary and stain.

To attach the electrodes on the two newspaper tube.

From white tubes kite guys.

Another time to stain stained with glue.

To make a sail.

Sizing them on both sides.

Cut off by the size of the sail. The ready tube that will keep the sails.

Glued to the tube sails.

Attach the sails to the newspaper ducts.

Make brown tube wheel.

Then you make a triangular sail.

Glued all the sails to the ship.

Here and ready to ship.

Posted on

DIY Bird feeder out of scrap materials

Bird feeder out of scrap materials 1

Required Material:

  • Plastic bottle
  • Clay (better to take waterproof)
  • Threads of the twine
  • Brush
  • Knife

 First knife need to make large openings on both sides of the rectangular shape.

Then apply a bottle of glue and a fully banded tightly with string.

Where were our hole in the middle cut the twine and wrap it inside, good fluff there glue. So the sides will look more aesthetically pleasing and will not be sharp edges of the bottle. On top decompose a thatched roof and a hard brush twine. Do not forget to make a long loop of twine to hang it was for our bird feeder. Now you can do the most interesting – the decor trough. In the course can go all do not mind. Here is all depends on your imagination and inspiration. Do not forget to make the holes and insert the perch that the birds were comfortably seated. Everything. Now you can pour the food for the birds and hang the bird feeder outside.