How to make cat from jute

We take any cone and begin to tightly wrap! I have a foam blank is glued to her double-sided tape and wrapped with twine From wire tail and do the same winding The body has a tail! Making ears harvested head Making the blanks legs nose and cheeks smeared with glue And now a little squeezing cone in quilling or just wrapped with a paper cone paws ready knit eyes! In one circle green white and black bars without nakida! Dark yarn was found had to touch up eyes close And now the steep back Well, that and the hostess finally I waited for her to go for permanent residence! Full set

Thank you for your attention!


How to make Jute Basket

Overview on different sides.

Some photos curves were obtained.

Turns around.

And now MC. The most I have done the first photograph, but I think everything is clear. In a jar put on a plastic bag, wrap the top jute, gluing it, let it dry. When filming, we had to top a little incision.

For the fortress was held inside again jute. The thing I’ll tell you, boring and pretty tyagomotnoe. But vase on the fortress-like wood.

Paste bedplate.

Crochet 3 chains, missed PVA and left overnight to dry.

Glued to the sides.

I wrap the handle jute while its sticking. Tails cut off the braids.

I begin to decorate.

I do not give to dry, attach directly to the place. Raw petals well take any shape. I got the place of attaching handles.

Glue the bottom 2 more leaf and beads.

still leaves pasted.

Clay and leaf curl.

Clay curl on the other side.

Decorate further.

The bottom of the inside.

DIY: Handmade jute lampshade

jute lamp shade 1

Hello, dear friends! Yesterday finished work on the new lights. I hasten to share the result. To use the base of the bottle of blue glass. Lampshades made of using his technique “Jute filigree”. did not. A lampshade in the shape of a hemisphere gathered on the form (flower pot) made separately from the branches. I did not know how things will turn out. Between the branches were gaps closed and connected the composition in the process of the various elements in the form of curls and leaves. The result had been the same for quite solid shade without gaps. The base was decorated with the same branches and curls of jute, Marbles, and pearls. Another lamp with a four-sided shade. In working with him, I also use a bleached jute (the idea came to whiten the rope in the process). Received an unusual, even more interesting, in my opinion. The composition is three-dimensional. The base also graced the simple and bleached jute, Marbles and contour on the glass. To use the backlight LED tape. It is safe and bright. Movement is. The cap is almost ready. Third still in operation. This is normal and bleached jute. This is also a jute. I experimented with painting with acrylics.

How to make golden grapes of jute and burlap


just come to mind)) wanted to unload the brain ……… leaves close bunch on another background So what we need for the creation of this masterpiece
in the image is not everything, just do not think that something will turn
3.glue titanium .pva .pistolet
4.needle, a crochet hook
5. branch
6.paint spray We are doing curls mustache. omit the twine in the PVA and wound onto the spoke. I reeled at the tip of the gum to keep. Dried on the battery here is a more two piece of twine, his coat with titanium and glue it together at the end of two whorls He drew a sheet could vine, planted by the file. a file on a path smeared titanium on top of the burlap.
on sackcloth also the contour of the glue and twine list.vsё spread out to dry.
nail scissors and then cut out the contour. burlap tore through 3 yarn wrapped pieces of delay. taped to the leaves . Now you can bend the leaf. foam cut into pieces 2 / 2sm.namatyvayu they split, forming tangles. wrapped berry leaving the tip of 15-20 cm 2-3 thread misses the hook pull the loop, and miss the end, tighten. berry ready Well, Circuits ready berries did 35 pieces. take the berries for berry and sticking a gun. twisting the ends in a circle in the middle of the glue dripping .prikleiv 10 pcs berries, the short ends are starting to cut,
so it was no more than seven in all cyst. yagodki2-3 glued pieces, cut off another short tail. (like clearly written) forming a bunch, one end of the grape wrapped in a circle all the ends, lubricate pistol strip all the excess, leaving two of the longest Bunch binds the two remaining ends and are formed by titanium two antennae. He hung on the wall to glue gun was easier loop. mustache wrapped around a piece of wood and glued the end to the gun. one sheet painted before to check the paint will fall. sticking leaves and tendrils like how to fill the void.
taped and carried to the balcony neighbors poison paint smell small leaf and tendril at the end of a piece of wood voila after  leaves and joints on carrying blёstochek little bit …. well, and are now looking for a place to which to attach. It is perched in the corridor … And this has already been made to order with the frame .good mood to all of you !