Posted on

DIY Silicone Transparent Floral Bracelet Tutorial

Here is a nice tutorial to create a silicone transparent floral bracelet that you can brag about. For those of you who love handmade transparent bracelet, we will share a silicon wristbands that you can place decorative figures inside today.

Required Material:

  • Bracelet mold for epoxy resin,
  • Double component epoxy resin,
  • A container to mix resin,
  • Stirring stick,
  • Dry leaves,
  • Toothpick,
  • Scissors

You can use everything you can shape for the mold, adjust the thickness according to your bracket. But then choose something that can be easily broken down because it can be difficult to remove after the silicone frost. Other than these, you can use varnish to give shine, and likewise leaves, plastic flowers ornaments to put in silicon.

We pour the mold transparent silicone that we have set for our knowledge and quickly place the pine leaves in your hand without waiting for the freezing. At this stage, the toothpicks are used to penetrate the silicone. You can use a thin apparatus.

We them wait 2-3 hours in a dry place for a while to allow the silicone to fully freeze and dry.

We carefully remove the drying silicone Wristbands.

With a very thin sandpaper we take the roughness and eliminate the sharp corners.

We then apply the varnishing process and leave it dry.

Our ultra stylish silicone bracelet is ready to use!

More Bracelet stylish:

Hope you like this transparent floral bracelet.

We would love to hear your thoughts in the comment section below. And be sure to like us Facebook for more ideas!

Thank you for visiting our website. Keep Creating with Art & Craft!

Posted on

How to Mend Jeans Holes in Cutest Way

Mending or a hole in your pants doesn’t have to be ugly! There are so many fun ideas out there to patch a hole. Here are some properly mended pants as well as some super silly mending. From patches to pom poms, you can sew just about anything in, over or behind a tear to make it look fun and playful.

Use this as a way to incorporate your child’s personality into their clothes. Ask them what they might like, and do the job together. Not only is this a way to recycle clothes, but it is a way to spend time together instead of being at a shopping mall.

Hope you like these cute ideas of mend jeans holes.

We would love to hear your thoughts in the comment section below. And be sure to like us Facebook for more ideas!

Thank you for visiting our website. Keep Creating with Art & Craft!

Posted on

How to make PVC Bathroom Shelf for indoor plants

Here’s a cute little thing, and indispensable for the house – bookcase for the bathroom, kitchen or balcony for indoor plants can make their own hands. To work needed PVC plastic water pipes, which can be purchased at any store building materials. Inspiring craft handmade for the home.

Working with PVC is a cinch. It’s like affordable structural tinker toys. The pipe is cheap, and you can get some really cool fittings.

Required Materials and tools:

  • PVC plastic water pipes,
  • jigsaws for cutting PVC pipe,
  • sandpaper or sandpaper P220,
  • measuring tape or meter tape,
  • primer for PVC or plastic,
  • glue,
  • PVC tees,
  • PVC caps,
  • wood, particle board or plywood – for shelves,
  • drill and drill,
  • screwdriver and screws,
  • paint in the form of a spray.

Hope you like this Painted Plastic Bottle Caps craft tutorial.

We would love to hear your thoughts in the comment section below. And be sure to like us Facebook for more ideas!

Thank you for visiting our website. Keep Creating with Art & Craft!

Posted on

How to Make Beautiful Earrings of Glass Flower

Required Materials:
Glass Bottle
Resin Glue
Dry Flower
Pearl Earrings Clip etc. Step 1: Balance

Put the 4 glass-shells on the silicone mold to keep it balanced during the producing process.

Step 2: Choose the Beautiful Flowers You Want

The selecting of flowers: Pick up the flowers you that are fond of and be careful about the matching of the colors. This action will help you make the color more astonishing.

Step 3: Trim

Trim the flowers you pick. You shall decide the size and length of the flowers according to the size of the glass cover. Step 4: Fill

Use tweezers to fill up the glass cover with the colorful flowers you just picked and be careful about the matching of the colors. Step 5: To Prepare the Resin Glue

Prepare the resin glue as follow. The proportion of the A glue and B glue is 3:1. Usually, we will prepare 2 different cups and these 2 cups will be used for loading A glue and B glue. Mix up the 2 types of glue and make sure you stir it evenly. Wait till the bubbles are disappeared. Step 6: Fill the Resin Glue Into the Glass Bottle

Now we will use a dropper to take some mixed resin glue and slowly fill it with the glass cover till the glass cover is completely filled up. Step 7: Put on the Top Cover

Put the metal cap onto the glass cover. Lay it away for 12 hours for the glue inside it to dry up. Step 8: Combination Resin Glass Bottle and Pearl Earrings Stud

Match up the coagulated glass cover with the pearl ear studs. Step 9: Packaging

Attach the finished products onto the card tags. Step 10: Complete!!

Posted on

How to Decorate Candle Holder/Stand from Plastic Spoons

Candle holders are heat-proof containers used to hold and display candles safely. They are almost always made of glass, metal or cast iron. Some are plain and purely functional, while others are decorative and used to improve the look of a home. Candle holders are also used as part of religious rituals.
Candle holders come in different shapes and sizes to hold differently sized candles. Some are shaped like tall glasses and are used to fully enclose a tall, wide candle such as a pillar candle. Others are simply plates, which are placed underneath the candle to protect the surface underneath, such as a wooden table. A votive holder is a small jar used to hold votive candles. Required Material:

  • Plastic Fork
  • Plastic Spoon
  • Waste CD
  • Waste bottle or cap
  • Glue
  • Paint and Brush
  • Decorating Mirror
  • Drawing Paper
  • Pen
  • Golden Pearl Step.1
  • First Paste Spoon to CD. Step.2
  • Now make the base of candle stand. Step.3
  • Time to Paint.

Posted on

How to Make Lampshade Using Plastic Bottle

Lampshade made using plastic bottle

use your waste plastic bottles and make with them a beautifully recycled lampshade.

Required Material:

  • Brushes
  • Decorative light
  • Plastic Bottle
  • Aluminium Wire
  • Green craft tape
  • Scissors
  • Glitter
  • Lighter
  • Cutter
  • Pencil
  • Scale
  • Craft Wire
  • Crepe Paper
  • Decorative stones
  • Glue Gun
  • Acrylic Colors
  • Color Palette
  • Decorative Tape

Step 1: Cut the Plastic Bottle

Take an empty plastic bottle and hold it horizontal. Cut the upper part of it carefully with a knife. This is to make the head of our lampshade.

Step 2: Paint the Plastic Bottle

Now paint the plastic bottle with green and yellow color. You can use acrylic colors for this.

Step 3: Draw Characters

In order to decorate further draw some tribal characters on the plastic head using black color. This type of drawing is called “Warli” art which is an ancient drawing art form in one of the tribes living in the forests in India.

Step 4: Final Look of Lamphead

This is how your lampshade head will look like after drawing is done.

Step 5: Make Plastic Leaves

Now we will make some leaves. For this, cut a small plastic piece from rest of the bottle and cut it further in leaves shape. Paint and decorate these plastic leaves in green colors and add detailing.

Step 6: Make Crepe Paper Leaves

Next, take a crepe paper and create some leaves out of it. Also, collect some ready made flowers from the market.

Step 7: Create a Wired Stand

Now take the wire and form a triangular shape with it. This will form the base of the lampshade.

Step 8: Complete the Stand

Erect the stand and it will look like this.

Step 9: Decorate the Stand

Now cover the stand with color tape and attach the plastic leaves and crepe paper leaves on it. It will start looking more beautiful!

Step 10: Fix the Lamphead to It

Now attach the lamp head to the stand at the top. Use glue gun to make it tight. Make a hole at the top of the lampshade and insert the stand shaft in it to fix it tight.

Step 11: Our Lampshade Is READY!

Finally, fix small torch light inside the lamp head with he help of glue gun. Now your lampshade craft is ready!

courtesy:  Ananvita

Posted on

How to sew case for the headphone and different things

cover manufacturer for headphones will not require you a lot.
Time and skills, and make it can be made of fabric remnants, surely you have different scraps, which can be put to use. And our detailed master class will help you with this.
This cover can also be used for storage of flash player or a miniature, here it is already possible to show your imagination. Cheholchik can be used as a pendant, it was convenient to use it, and he was always there.
Let’s get started …

Required Material:

lightning;
main fabric;
Lining cloth;
Nonwoven for sealing or batting;
pattern, scissors, thread and a good mood.

From the base fabric (in this case, and colored dots) cut parts 1 – piece 1, 2 – 2 pcs., 3 -. 1 pc. (Pictured Circuits numbered).
Lining (in our case striped) and nonwoven 1 -1 units 2 – 2 pieces.
Swing 1 about 9-11 cm 3 -. 4-5 cm Details are given with allowances. The size of parts may be changed depending on the purpose for which will be hereinafter used.

As a result, we have obtained a number of parts:

Sleek interlining to the three parts of the base fabric:

Take a semicircle lining fabric face up and put on his zipper, so that the upper edge coincided:

Set top semicircle of the base fabric (also raze edges)

Now the “structure” should flash, departing from lightning about 5 mm (for convenience staple items or stoned)

So we turned one-half of the top of the cover. Similar actions are performed in the second half. Here’s what you should have:
The right side of the box:

Wrong side of the box:

Take preform face up and sew the two sides of the zipper, departing from it 2-3mm. Unzip to the middle and hand stitched back and forth for fixing:

We make a loop at the edge of the lightning. Take part 3, fold the edges to the center and then in half:

Sew part of the long edge on both sides, stepping back 2-3mm.
Next, bend your future loop in half and sew to the place where previously secured the zipper:

Take parts cut for the back side (of the base fabric (dots) and the lining (striped)). Circle, a cut out of the fabric put face down on top of the face we put a circle of lining fabric:

Now all this will place on the front part of the cover (lightning necessarily rastegnut until mid) and stitch around the circle, stepping back 5 mm from the edge:

Carefully cut off the tails of unnecessary padlock and trim allowance circle (leaving about 2-3 mm)

It turns out, stitch along the edge of a round cover, retreating 4-5 mm.

To our was always with us, we attach to the eyelet in the ring!

courtesy: livemaster
Posted on

How to make a newspaper rack / holder – Step by step tutorial

Awesome Kitchen Organization Ideas- Storage thing… How to make a newspaper rack / holder… DIY craft tutorial…

Watch video tutorial how to make Newspaper Roll:

Watch Full video tutorial here:

Hope you like this Painted Plastic Bottle Caps craft tutorial.

We would love to hear your thoughts in the comment section below. And be sure to like us Facebook for more ideas!

Thank you for visiting our website. Keep Creating with Art & Craft!