DIY Hexagon Lap Weave Coaster (Tutorial)

Weave Coaster: On the frame pull the strings. Wrong side where cloves. First pull the thread that should be on the front side, then the other color. It is not necessary to pull very hard, because in the process of binding knots canvas will be stretched. The intersection point of the threads is usually associated nodules.

At each point becomes 3 nodule crosswise. For nodules must take strong sewing thread. Threads can take any, except for the stretch.

If you can not find such a hexagon, you can also use a square and a few nails, transformed into a hexagonal as below.

Hope you like this tutorial.

 

We would love to hear your thoughts in the comment section below. And be sure to like us Facebook for more ideas!

Thank you for visiting our website. Keep Creating with Art & Craft!

Beautiful coasters out of plastic bottles

coasters out of plastic bottles 1

Required Material:
– 1.5 liter plastic bottle
– Iron tray
– wipes
– glue
– brush
– pencil

1. Cut off the bottom of a plastic bottle

2. Place the iron tray on a gas stove and heat it. When it warms up, put on his cut bottom of a plastic bottle. In order to ensure smooth and rounded edges, rotate the tray in opposite directions.

3. The bottom of the bottle to attach a napkin and draw, you will need to retreat from the edge of 0.5 cm.

4. Cut out the napkin and separate its upper layer.

5. Now you need to grease the bottom of the glue.

6. Insert the napkin into the bottom and gently distribute it.

7. Above the napkin, apply with a brush glue and lacquer – for decoupage.

8. Allow the product to dry and harden.