Beautiful stained glass and mirror

Stained glass and mirror 1

Here is a stained glass made with their own hands, can be a great gift to your friends and colleagues

What do we need:

1.Tile decorative mirror the size of 20×20 cm.
2.A piece of hardboard (I have bits of binding).
3.Stained outline and paint the desired color. Paints, preferably on an organic basis, drawing a lollipop then when dry.
4.Alcohol Lotion for degreasing and all sorts of sticks and correction pattern.
5.Himself drawing a template. I had a draft for a stained-glass picture, so I cut a piece from there.
6.Tracing.

1. Clean.
2. Apply drawing on tracing paper, very artistic circle. If desired, add Circuits.
3. Later on, the mirror copied circle contour drawing stained-loop (oh, and turned a tautology). 20 minutes to dry to give the contour. I look for there to have a drink, I’m the next series “Supernatural” looked.
4. Naplyuhat in the contours of the paint. Again, see the series something new, or pour a cup.
5. Add a loop curlicues and dots.
Done! Lay off the mirror Teperdelaem stand:
1. Cut a piece of cardboard the width of a wish, but the length of half of the mirror plus 3 cm on the gluing. Neatly fold incision future (I breadboard knife was at hand), but of course, not completely .Paint in any color. I painted in white.
2. Again translate drawing, denoted by its loop, dry them.
3. Refill paint and gives a very cool as if it were applied on top of the enamel. Cloisonne. To show the volume snapped and drawing more on the side.
4. Add the trinkets circuit. So we’ve got. Merge mirror and stand. I was attached to the tile film it and benefited from it. In general, I recommend liquid nails to the mirror substrate is not corroded.Result.

How to make glass christmas candlestick – Step By Step

glass christmas candlestick 1

To work you will need:
glasses, napkins to decoupage with Christmas motifs, glue for decoupage (PVA can be used)
two-step or other krekelyur KREAL krekelyurnaya couple, acrylic top coat, glitter, white or silver liner,
acrylic colors: black, ivory, blue,
brush with a foam tip,
glass cleaner, translucent gel pearl paint for decoupage.
Degreasing liquid glasses for glasses. Cut the cloth desired motif with a round object

Cut and separate the top layer of napkins

One of the lower layers of cloth glued to the glass, trying to avoid the formation of wrinkles. Liberally grease for decoupage glue or PVA glue, cloth must be completely saturated with it

With a sponge paint cloth translucent pearl gel. Because of this, our theme will be more pronounced, retain partial transparency

That’s how it should turn out

Cover the glass with acrylic lacquer. Now it is white in the picture, and after drying becomes transparent. Cover several layers, the surface must be absolutely smooth.

Gently and evenly applied 1 step other couples. After 15-20 minutes (must be a state of stickiness) is applied  №2.

sprinkle with glitter

Dry the hair dryer for the manifestation of cracks

Glue cloth with the motif starting from the center. Top varnish and glue for decoupage

Mix acrylic paint to achieve the desired shade. The toothpaste can be used as a white paint

Glass does not paint,

At the edge of the motif spend liner to give a three-dimensional glass effect

Draw along the edge of the glass liner

Liner distinguish the outlines of certain motifs

Sprinkle glitter liner

Do not forget about the glass stem)

That’s all)

DIY Glass beads decoration panel

glass beads decoration panel 1

Rice was translucent, so I had to paint it simple gouache.

The space between the contour smeared PVA glue and then bombarded the desired grains. Translucent rice on top of more sprinkled colored sand, which remained from the picture-bought “semi-finished”. Thus obtaining a light blue, red and brown.

That’s what we’ve got. We started work at 18:00 and finished at 23-30. Children very much like to congratulate the mother as soon as she wakes up

And this is a work in the frame.

DIY Mandala in stained glass – Awesome art

Mandala in stained glass featured

Hello, I want to share with you how you can make a mandala in stained style myself, patience, imagination and materials. The main problem I encountered is to buy a square frame. You can of course do that on a rectangular (in my diary you will find different circuit complex and simple), but I wanted it square. From the materials you will need: stained glass paint, acrylic contours, acrylic paints for ceramics (for which the path is not needed), as well as the scheme itself mandala drawing printed on the desired format.

Printout placed under the glass some areas draw paints ceramics, some fill in the technique of “point by point”, some stroke a path and fill with stained glass paints. That is, do all that prompt your imagination. You can do some simple contours and colors of stained glass.

Process: