I want to share my method of assembling boxes. The principle of the assembly all the same, first going to the frame, and then filled the walls. Making the work piece. Tube 5 cm long. Glue the small details in the strip. Glue them to the angular ducts. And there are 5 items. Glue them together.
When he was a child, on the lessons of labor made boxes of cards, and we suggest you make a box out of plastic bottles
Cut the bottle in the smoothest place (sorry showing on another bottle).
To do this, use the trunk:
1.5-liter bottle of 6 pieces
2.5 liters – 1 piece: for the convex part of the cover
to make such blanks. According circle cut the smoothest place in the bottle – there is usually a label.
Folding at the seams – they are can be seen. The back of the scissors spends on them a few times. The plates obtained by direct due to the fact that the plate is folded in half. It turns out that the halves are twisted in opposite directions, pressed against each other and the plate is rectified. Plate gets a double – and you are using it.
Punchers at equal distance of making holes, tied with crochet.
Putting all the blanks. Decorate with flowers. Flowers you can do with a master class on creating decorations from a plastic bottle.
For example, these sunflowers:
Beads also made from plastic bottles. To do this, cut into stripes of 2 mm in width and 1.2 cm in length, is heated over the fire and turn in the ring.
Prepare a casket next to pieces of paper and write on them the happiest moments of your life,
which will take place this year.
They will be so much. Individuals in a family where the young children – those happy moments happen every day.
You just need to write them down on a piece of paper and lay down in the box. Required Materials:
– PVA glue
– glue Master (can be titanium, time, hot gun)
– a piece of tile ceiling
– Stationery knife
– acrylic paint
– decoration “butterfly”
– a drawing or printout
– stick from the children’s prints (to work in the art I use this particular device – it is sold complete with engraving,
I tried to work and nail file and knife, but I prefer to put the cloth in the slot of the rod). Encircles the lid on the tile. But I made a circle on the tile smaller diameter. Somewhere on 5 mm less than that than to stick the cord. Draw drawing. Here we see that the circle cut from a tile smaller than the lid. Prikleevaem tiles to the lid. Pressed down and wait until skeleta.
And then rising above the remnants of fabric to hide in the slot with the help of sticks. Like this. And then I got carried away and forgot much work still to do at least a couple of photos.
The background that is crimson, I wanted to make a solid beginning.
But in the process in the field of acute leaves gathered pleats and had to save the image by five additional slots.
After the end of the circle cord.
And decorate a butterfly. Inside painted with acrylic paints.
Well, here you have also noticed that at the bottom is glued another tape. Initially, I pink.
And when dressed cap, the upper band is not seen it, not promptness pink and light green tape immediately struck.
I immediately corrected this case)))))))
And on the side seam of the cloth to hide it a too butterfly. I like and I am very happy. Lids certainly not perfect and master this technique will notice the flaws, but I and forgive me))))))))) on the other hand Our two lucky moment already went to wait on December 31 !!!!!!
After reading the “happy moments” of the outgoing year the leaves can be folded into an envelope and mark the year of the memories!
A casket continue to fill with new highlights!
And so every year!
I think this is a great family tradition!
Help happiness be with you!That’s it. Thanks to everyone who has paid his attention and looked at
And a special thank you to those who leave your comments!
They are very important to me!
Be happy and do not forget to give happiness to their loved ones !!
Belt width 5,8sm, 40cm length, twisted on needle 1,5. tube paint for the eggs. Two coats of an acrylic clear coat. At the bottom of decoupage and varnish. Dimensions: 30 * 22 * 10.Businy wood. However, everything in order.
Well, something to help beginners. It said loudly, that it will be a master class. I share what I can. Photographer I useless. Well, what happened, what happened. So … cut to form two cartons
Measured basis, divide the desired distance between the stanchions. If you can not without a trace, corrects the distance. I got 1,8sm. Normally, less is better. Postpones 1.8, starting from the center of the “heart” It turned out this way … I prepare the paper and more … The paper pasted on cardboard with white glue and left to dry. A bit dry and put under load, so as not curled hours on 12. The process of bonding is not removed, fascinated.
While the bottom of a dry, paint tubes. Expanding to dry and leave everything until the morning. And in the morning for a surprise. That such a result is obtained. Apparently, the tubes were caught from different parties. I hope that will be enough of a color. Clay “Titan” pasting tube Top pasting the front of the bottoms. The process of gluing napkins too missed. Well, not all at once. Decoupage do with the file. I put the napkin “face” down at the file, pour some water into the center of a little and start to lift the edges to Vodicka gradually distributed on a napkin and no wrinkles. I add a little brush continue to keep raise for all parties. Try to keep the water before the time has not got to the edge (tear). When there is only the edge unglued, helping brush. When the napkin is flat, without wrinkles on the file, carefully poured the water and turn on the bedplate, smoothes. I remove the file from top to drip screed and PVA brush. Land. Yes! Two hearts are glued together, too, putting under pressure until it sets. It is better to wait a little longer. Clay grabbed. I begin to braid rope bottom of a single row. I lift the rack and begin to weave a rope in the two tubes. Get out of shape, that’s what happened. The result is not pleased with what’s nose turned out. It was necessary to equate the braid after varnishing. close: in front of the two, in the third It remains the last three tubes. The first of them is bent before the two and slips under the first rack start crisscrossing. Second-on rising: before the third and the inside of the first braided basket for the second braided out by drawing Fotik agreed to work only to that frame. I had to finish without him. And it is you! This beauty blossomed in my yard, and I am very pleased.
A miniature casket made of plastic canvas. Plastic canvas – a fantastic material for many kinds of handwork. It is dense, come in different colours, white, cream, Gray, black and clear. The advantage of this canvas is that she is not afraid of water, has a beautiful smooth edges that do , not wrinkled, suitable for 3D embroidery. Plastic canvas for sale size A 4 and has a different number of holes per inch: 5, 7, 10, 14. Canvas 14 holes per inch has small holes and embroidery looks at this canvas is much more elegant. Therefore, take this box of embroidery canvas. More will need: a needle, thread type floss, scissors, pencil, paper, glue, staples.
Embroidery consists of simple squares of embroidered stitches. Based on this scheme can determine the size of the box. Choose the length and width of the finished boxes, using the template as a guide. The bottom cover makes a little more bottom boxes to cover can be put on the box.
You can embroider on the whole sheet and then cut side, during embroidering knit knots, and tighten the tail for embroidery.
Example embroidered caps and side boxes.
So it seems the bottom and sides of the box.
On the front side of the box double thread sew the seam was tight.
Sheathe edge boxes and covers.
Inside the box lid and paste paper or cloth. This box can be used to store small items of jewelry.