Required Materials:
- Tin Sheet: 0.3mm thick – 15 inches by 20 inches
- Aluminum strips: 14 inches length (1 unit) and 8 inches length (2 units)
- m-seal – 2 units
- Tin funnel: 10 inches diameter – 1 unit
- Drainage mouth: 50mm diameter – 2 units
- Nuts and Bolts: m4 – 30 units
Required Tools:
- Hammer File (for smoothening metal edges)
- Scissors
- Measuring Tape
- Screw Driver Set
- Nails
- Marker
- Drill Gun
- L-Angle Rod
Image Sources: thelogicalindian.com
