How to make decoupage candle – Step By Step

We need the pages of a glossy magazine, wick, wax, scissors, tape.
Decided to form a cone-shaped. To do this from the magazine “kulechki”, after inserting the wick, the whole construction fix tape. Is melted paraffin and fill the blanks. We are waiting for complete solidification.

Here are our candles (wanted to make a series of different-sized candles, united by one pattern, but unfortunately my long candle fell during solidification, so I will digest it) chose to decoupage napkins with a floral pattern (tulips)

Cut along the contour drawing is applied on the candle so as we would like it (I like the flowers will grow from the bottom to the fetelku candles). For the most decoupage we need a candle and a spoon.

Heat up a spoon over a candle on the inside (note the spoon is smoked, so we will smooth the napkin convex side of the net), and gently begin to smooth circular drawing motion, starting from the middle. Under the hot wax begins to melt spoon and a napkin as if fused into the candle. Similarly, I am doing the back side of the candle

We get the result. In principle, everything is ready, but I wanted to give the amount of the drawing using a wax marker: the bottom of the candle and surveyed the contour color gold color.

It seems to be not a bad second candle melted down and make them even third – the baby. Result later

How to decore wedding candle

Let’s start:
Candle drained from the wax. Form – a big plastic glass of 5

We get here this form. Carefully cut and edge vyravnimaem

The candle is ready. Getting decor. I took a self-adhesive paper and drew a desired pattern (in my case – Hearts)

Cut, that’s what happened

Stuck on the candle

A white candle , and our hearts will not be seen, so its tint acrylic contours and candle marker

Next trick – we paint on this technology: take an ordinary plastic bag, drop into the paint our candle (get a rough outline of a divorce)

We reserve our candle dried.
Note: The main tear hearts before the paint dries !!!!! Then, drawing the edges are straight – otherwise the paint will last !!!!!
Meanwhile a plate – I have already pre-painted in the same way

We need: beads, pink, plastic (molded itself), the adhesive

So, paste the roses and large beads

Then add beads

And in the end all decorate loop, that’s what got. Skeet – ready !!!!

We return to our candle. We emphasize the contour of the figure wax marker

For decorative use the same rose and beads, pre-strung them on the needles (to our entire structure is firmly held, glue using a minimum). I took half of the pins, or just a hard wire.Roses strung still raw, and beads on the needle glued on the glue.
To the candle is not cracked, heat the needle before sticking

And decorate, first rose

Then the large beads

On the adhesive glue beads

Wax marker concludes decor

That’s what happened in the end

Thanks to all who looked!

10+ Simple Arabic Mehndi Designs [2017]

Arabic Mehndi designs are different from Indian Mehndi. These are mostly detailed, have spaces, and sometimes resemble some architectural designs. Common designs include flowers and peacocks, which are very much known for its beauty and exquisiteness. Other designs include veils and swirls recurring in a geometrical template.

Beautiful Elegant beaded pin bracelets

Jewelry has attracted women of all ages since the ancient times. Few girls in the world can pass by a jewelry store without looking at the sparkling showcase of bracelets, pendants, or earrings. And even if they can’t afford anything, they at least want to try on one of those beautiful things. However, if you use a little effort and patience, you’ll be able to create a worthy alternative to store-bought jewelry.

Required material for Beaded pin bracelets:

  • safety pins
  • beads with a large hole
  • hat elastic

Take a look, what beauty is derived from such a simple material.

Easter Baskets & Ideas for Spring Activities

The tape core when you’re done you do not rush to throw away much recycled into Easter basket for spring activities for dear friend.

You need to prepare the following materials:

  • Core tape: type of 6cm wide or more (take advantage of the roll of tape has run out as the box itself)
  • Paper color: multicolor
  • Hard Paper (bottom and lid made)
  • Wire decorative paper (you can replace it with wire cloth, rope small …)
  • Glue 2 sides
  • Drag, stylus

Step 1:

First, place the tape on core blue paper plate, grab a pencil drawing circles around the core paper and cut out. You need 3 green circle like that. Next place the tape on cardboard cores draw circles around the core paper, cut jagged around outside the circle has drawn close to the length is 1.5 cm. You need 2 serrated circle. Use milk glue green circular sticker on the white jagged circle, gently fold the steep surrounding jagged blue circle.

Step 2:

Green paper cut into long strips with a width of 1cm, the length by the width cores plus 1cm tape to paste outside. Cutting with the double sided tape 1cm wide tape inside the core paste and paste outside. Turn blue paste strips of paper, starting from the inside and outside corrugated paste. Sealed off tape inside the core.

Step 3:

Next, you put the tape pasted core blue paper recently grafted onto bottom circle in step 1, double-sided adhesive stickers one round outside, gently fold the saw teeth overlap the glue paste. Cut 1.5 cm wide strips of colored paper glued moss outside layer stack of blue paper. Add glue paste outside serrated layers ensure adhesion sure. You box yourself.

Step 4:

Cut a long strip of paper with a width of 1.5 cm Hard wrapped around the outside layer of moss colored paper, cut and paste paper strips into circles. Note: do not stick to the core circle of paper tape. Paper core upside down on cardboard, draw a circle outside, jagged cut around the circle just drawn, pasted on the circular serrated circular plate as the lid.

Step 5:

Making the box with a handle: blue circle Paste (cut in step1) sticker on the side of the lid, the next you cut 1cm wide strips of long white colored paper wrapped around two sides and then glued to the lid, glued strips around the fixed paper, paste red flowers (made above) decoration on the lid.Your body paste paper strips sealed box around.Gift box your finished!

Step 6:

How to make paper flowers: you need a wide strip of pink paper 0.3 – 0.5cm long 15 cm, and 1 strip of red paper with a 6cm 15cm wide. Double the red paper strips, using straight strokes on the folds size. Fold one corner of the triangle and cut diagonally to form.Perform tassels cut paper strips parallel to diagonal cut.The tassels with a 0.1 cm wide – 0,2cm, length 2.5 cm.Glue strips of milk paste a pink top at the beginning of the red paper strips just finished cutting.

Step 7:

Place the tip of the pink paper strips into the slot of the twisted paper instruments (without this tool, you temporary head lightly glued toothpick or sharp awl for easy scrolling) rolled into strips pink, pink roll out continues Roll with a red circle. When you notice the book Roll tightly and evenly hand. After finishing the book fixed with glue paste of milk, you have red flowers twisted paper. Similarly you make more red flowers to decorate gift boxes to add highlights.

With just a bit of paper cores and colored tape, through skillful hands of you, it has turned into a gift box cute!

This should be a simple gift that interesting, to your surprise gift for your loved ones! Good luck!