How to make herringbone tunnel – Step By Step

I hope that, in spite of a few non-standard shape, our tunnel take root in their family)) Honestly, it was conceived as one of the demonstration models for the lesson … In the process of work, I crept into the idea that it can be used as a toy on Christmas tree school.

Required Material:

  • paper pastel A4 format (2 sheets);
  • watercolor paper A4 (3 sheets);
  • pencil;
  • metal ruler;
  • knife breadboard (I prefer to cut their paper only);
  • glue…

Dimensions pastel paper does not allow me to make a full scan of the sides of the tunnel … so … so … Drawing In the tunnel height of 16cm, width 15cm and 8cm glubina-

Like most of you, I spend soft easy on the fold lines with a knife … a bit … avoid creases when folded ….

Do … accordion intervals .s 19 (mm) x 10 (mm) x 10 (mm), -20 (mm) x 10 (mm) – 10 (mm), -20 (mm) x 10 (mm) x 10 (mm) -19 (mm) height … accordion must be less than (at least 8 mm) the height of the tunnel … a little again passers-by with a knife. There, where the diagram solid lines- the front side and the back where shtrihovye-.

Folding and gluing an accordion.

Now insert a few … they are drawn spontaneously

Getting to the assembly)) Glue the sides of the accordion.

To glue edges accordion inserts, in accordance with the planned composition.

Hope you like this herringbone tunnel.

Image Source: pinterest.com

We would love to hear your thoughts in the comment section below. And be sure to like us Facebook for more ideas!

Thank you for visiting our website. Keep Creating with Art & Craft!

How to make Eco-friendly Ganesh Idol at Home – Step by Step Image Tutorial

Ganesha is a much-loved God and making him out of clay is such fun! Here’s an easy, step-by-step tutorial for an eco-friendly Ganesh idol that you can make at home!

Indians celebrate Ganesh Chaturthi with great fervor and delight. Most of them bring Ganpati to their home. The Ganpati decoration at home begins well in advance. Traditionally made idols pose a threat to the environment. They cause lots of pollution and contaminate our water bodies. This year use eco-friendly materials to make Ganpati idol and non-toxic colors for decorating it.

Step by step instructions for making a Eco-friendly clay Ganesha at home

In India, the festival of Ganesh Chaturthi is celebrated with great pomp and show. On this day, Lord Ganesha is worshipped as the god of beginnings and remover of obstacles. The ten-day festival culminates on Anant Chaturdashi when Ganesha idols, which are made of clay, are immersed in water bodies.

Nowadays, there is a growing awareness amongst people to celebrate Ganesh Chaturthi in an eco-friendly manner. There are many ways in which you can make an eco-friendly Ganesha idol at home.

Hope you enjoyed this step by step making of Ganesh idol at home. Do try making one for yourself. But, remember to use Eco-friendly, non-toxic clay.

Watch Videos to Learn and Make Quilling Ganesh Idol at Home

Hope you like these Eco-friendly Ganesh Idol step by step tutorials.

Other Ways to Make Eco-friendly Ganesh Idol

One of the simplest ways is to make an idol out of paper mache. Paper mache is a paste made out of flour and water. To this paste, strips of paper are added. Once the paste dries, it hardens and can be moulded into any shape.

To make the idol, start by making a small ball out of the paper mache paste. This will form the head of the Ganesha idol. Then, make two smaller balls for the ears and attach them to the head. To make the trunk, roll a strip of paper mache paste into a coil and attach it to the head.

For the arms, take two strips of paper mache paste and roll them into thin cylinders. Attach these to the sides of the trunk. To make the hands, roll small balls of paste and flatten them. Make sure to leave a small hole in the centre of each ball. Attach these to the ends of the arms.

To make the legs, take two strips of paper mache paste and roll them into thin cylinders. Attach these to the bottom of the trunk. For the feet, take two small balls of paste and flatten them. Make sure to leave a small hole in the centre of each ball. Attach these to the ends of the legs.

Your eco-friendly Ganesha idol is now ready to be worshipped!

Another way to make an eco-friendly Ganesha idol is by using recycled materials. You can use old newspapers, cardboard, or even scrap fabric to make your idol.

To make an idol out of recycled newspapers, start by tearing the paper into small strips. Then, dip these strips into a paste made out of flour and water. Once the strips are coated with the paste, mould them into the desired shape.

To make an idol out of cardboard, start by cutting the cardboard into pieces. Then, use a hot glue gun to stick these pieces together. Once the pieces are glued together, mould them into the desired shape.

To make an idol out of scrap fabric, start by cutting the fabric into small strips. Then, dip these strips into a paste made out of flour and water. Once the strips are coated with the paste, mould them into the desired shape.

Your eco-friendly Ganesha idol is now ready to be worshipped!

Image Source: Homemakeover

We would love to hear your thoughts in the comment section below. And be sure to like us Facebook for more ideas!

Thank you for visiting our website. Keep Creating with Art & Craft!

How to Make Pumpkin Seeds Bouquet

Crafts from natural materials are perhaps the most favorite form of creativity in children of all ages. Working with natural materials retains heat and hands of the master and always carries a positive energy. Very beautiful crafts can be made from seashells, acorns, chestnuts, dried leaves, etc. But the most original, and at the same time easy to manufacture work can be obtained from the usual pumpkin seeds.

Pumpkin seeds – this is an easily accessible natural material to work with which it is possible at any time of the year. Pumpkin seeds can produce a wide variety of original crafts, such as floral bouquet. I bring to your attention a master class on making flowers of pumpkin seeds. These flowers turn out very beautiful and original, and most importantly – they are easy to make and do not require great physical and financial costs.

Required Material:

1. Pumpkin seeds;
2. Peas;
3. Silicone adhesive;
4. PVA glue;
5. Floral tape;
6. Hessian;
7. Wooden sticks;
8. cardboard sheet;
9. Jute yarn;
10. The compass;
11. Simple pencil;
12. Scissors;
13. Acrylic paint white;
14. Brush;
15. Ruler.

Before you begin, you must treat the burlap so that it becomes rigid and does not crumble. To this mix of PVA glue and water in a proportion of 50 to 50 and fully put in the sack solution. After that, the fabric should be dried and ironed. While dried burlap, let us direct manufacturer flowers. The basis for the colors to be a circle of cardboard. Using a compass draw a circle on the cardboard with a diameter of 6 cm., And cut it. Now take the pumpkin seeds and using a silicone adhesive or glue “Moment”, pasted them in a circle. Paste the seeds so that their sharp edge was on top. The first row of seeds prepared. Now just glue the seeds of the second row. Sunflower seeds in the second row should be staggered and overlapping with respect to the first row. Also, do the third and fourth rows of seeds.

The middle of the flower reserve not glued.

Now we turn over our flowered on the back side and glue have to this side of a row of seeds.

Since our bouquet will consist of three colors, then make three for flowers. Pumpkin seeds, which we used for the flower petals are not very beautiful yellowish tint, so we using white acrylic paint, paint them white. We leave flowers alone until they are completely dry. Until the paint is dry, we do not lose time in vain and will prepare two cardboard parts: a circle with a diameter of 6 cm, and lepestochek, the height of 7 cm, and width – 4 cm… The carton blanks are put on the pressed and dried burlap and encircle their contours. Circles will need to cut 3 pieces, and petals – 6 pieces.Next a burlap circle glue on the reverse side of a flower preform. And along the contour cut petals from burlap, we stuck jute thread. And now it’s time to prepare for the stems of flowers. To stem can be used straight branches of the tree, we took advantage of chopsticks for sushi. Take floristic tape green and completely wrapped with it every wand. If you do not have floral tape, you can use the corrugated paper. We make three identical stems. Now we collect our flowers. In the middle of the flower Do the workpiece hole and insert the stem into it ready. In the middle of the flower glue yellow peas, which for strength from above abundantly watered with white glue.

Also, instead of peas can be used dried corn kernels, buckwheat or grains of pepper.

And finally left to attach the petals to our flowers. Fasten them using floral tape or corrugated paper.

That’s all – flowers ready! It remains to put our bouquet in a vase. This original bouquet decorates any space, especially natural corner in the school or in kindergarten. Good luck and success!

Source: Chudesenka

Thank you for visiting our website. We seek to always bring the best for you.

Did you like the Tutorial ? Leave your comment.

How to do Shadow Work Hand Embroidery

Today we are making Shadow Work.

Shadow Work is a type of embroidery worked on semi-sheer or sheer fabric, with the bulk of the embroidery on the back of the design so that the colour of the thread – or rather, a shadow of the colour – shows through on the front of the fabric between two solid-colored outlines.