Different Types of Kurtis Designs For Girls

Different types of kurtis designs For Girls

Kurti has become the women and girls most favourite style statement to look stylish with the charming traditional look. These classy yet trendy kurtas are so comfortable that you can wear them round the clock. The best part is that you can easily modify and customise Kurtis for different looks. Available in different styles and patterns, kurta is first to picked of college going girls, working women, social women as well as of housewives for any occasion. Fashion designers are trying to keep pace with the growing popularity of kurtas and find endless options to design kurtas according to the latest trends. As a result, wearer gets ample choices, from ethnic to Indo-western style with different patterns, cuts, and designs. Some popular types of Kurtis are mentioned here; just have a look and you will get smart ways to look best in all avatars

Courtesy: Spring Collections

Different types of kurtis neck designs

Kurti is an Indian traditional dress worn by girls and women. It has been used as a casual wear since ages. Nowadays, it is also being worn by women. In India, there are different types of kurtis available. They are mostly made from cotton or silk fabric. There are many types of kurtis designs available in the market. You can choose one according to your taste.

Kurti has become the women and girls most favourite style statement to look stylish with the charming traditional look. These classy yet trendy kurtas are so comfortable that you can wear them round the clock. The best part is that you can easily modify and customise Kurtis for different looks. Available in different styles and patterns, kurta is first to picked of college going girls, working women, social women as well as of housewives for any occasion. Fashion designers are trying to keep pace with the growing popularity of kurtas and find endless options to design kurtas according to the latest trends. As a result, wearer gets ample choices, from ethnic to indo-western style with different patterns, cuts, and designs. Some popular types of Kurtis are mentioned here; just have a look and you will get smart ways to look best in all avatars

Selective Types of kurtis neck designs

Emboridery neck border design for Kurtis

Yellow Kurti design with green border

Kurtis are traditional Indian garments which are usually made out of cotton. They are very comfortable and easy to wear. They come in various lengths and colours. Women love wearing kurtis because they look good on every body type.

Cute Kurti neck design – suitable for girls

Chudi neck design

The kurta is a traditional Indian garment which is usually made out of cotton. It is a loose fitting shirt with long sleeves and a round collar. The kurta is usually worn over pants or trousers. The neckline of the kurta is usually straight or slightly curved.

Trending Neck Design for Kurti, Salwar-Kameez

Stylish Kurti neck design

Suit Neck Design

Kurtis are traditional Indian garments that are made up of two pieces – a shirt and a pair of pants. They are usually worn over long shirts and trousers. The kurti is a loose fitting garment which covers the torso and upper body. It is often used as casual wear.

Kurtis with V-shaped necks

Cotton Kurti Neck Design

U neck design for kurtis

New kurti neck design for girls

A line kurti neck Design

Simple Door Shape Neck design with dori

Simple neck design for Kurti

Unique Kurti design for female

Modern Kurti neck design

Loving kurti neck design for weddings

Latest Neck designs for Kurti

Sexy kurti neck design

Some more different types of kurtis neck designs

* A-line kurtis with Mandarin collars

A-line kurtis with Mandarin collars are a stylish and elegant choice for any occasion. They are perfect for both formal and casual events, and can be dressed up or down to suit your needs. The A-line silhouette is flattering on all body types, and the Mandarin collar adds a touch of sophistication. Whether you choose a solid color or a printed kurti, you are sure to make a fashion statement.

* Kurtis with V-shaped necks

Kurtis with V-shaped necks are a type of clothing that is popular among women in India. They are typically made of cotton or silk and are worn over a blouse or shirt. They are often brightly colored and can be embellished with embroidery or other decorations. Kurtis with V-shaped necks are considered to be both stylish and comfortable, and they are a popular choice for Indian women of all ages.

* Kurtis with boat necks

A Kurti is a traditional Indian garment that is often worn by women. Kurtis with boat necks are a type of Kurti that feature a boat-shaped neckline. This type of Kurti is typically made from a light and airy fabric, making it ideal for warm weather. Kurtis with boat necks are often decorated with intricate patterns and embroidery, and are often worn with a lehenga or saree.

* Kurtis with round necks

Kurtis are a type of shirt that have a round neck. They are usually made of a cotton or linen material, and can be either long or short sleeved. Kurtis are worn by both men and women in many different cultures, and are often seen as a more traditional type of clothing.

* Kurtis with square necks

Kurtis with square necks are a type of clothing that is typically worn by women in India. They are usually made of a cotton or silk fabric and can be either long or short. Kurtis with square necks often have intricate designs and patterns on them, which makes them very popular among Indian women.

* Kurtis with halter necks

Kurtis with halter necks are a great choice for a summertime look. They are comfortable and stylish, and can be dressed up or down depending on the occasion. Pair them with shorts or a skirt for a casual look, or dress them up with pants or a dress for a more formal occasion.

How to sew a bright summer dress for girls “Strawberry ice cream”

Soon, many will go to such a long-awaited vacation! Someone close to the sea, some to the country! And to this wonderful time, of course, we need to thoroughly prepare! We always want that to our girls look the most beautiful and fashionable, and with it, their clothing was easy and convenient, and the tissue from which it was sewn genuine.
I assure you, create, sew the perfect dress their girls to the power of many! And I invite you to a workshop on self-tailoring summer beach dresses for girls of any age! In such a nice light dress can make a leisurely stroll along the sandy beach or go boldly into a small sea voyage on a boat!
And how to spend days of fun at sea under such a bright hot sun without a hat? I propose to make a simple partial scarf with elastic in the kit to our dress.

Let’s get started:
Required Material:
The basic cotton fabric. I chose this merry pretty popular cotton charming Morozhenko.
Fabric companion cotton, for some items and decor of our dress.
Thread cotton fabric tone.
Children’s T-shirt for making patterns.
Elastic narrow 0.5 cm and 1.5 cm wide.
Tape measure.
Sewing machine.
Iron.
Scissors.
Safety pins.
Tracing paper.
Crayon or marker for the tissue.
Now it is a very fashionable dress with such a romantic flounce at the shoulders. It’s something we are going to sew. Dress, in my opinion, is not difficult, but very interesting and spectacular! Imagine how charmingly will sway in the wind shuttlecock. Also, we will have an asymmetrical bottom and unpretentious ruffles.

1. Construction of a pattern
Since my workshop is intended for all those who are unprofessional sews clothes, I decided to give you not finished the pattern and not the one that will have a long and hard to build, and an option to many easily sewed a dress their baby. So, take the baby t-shirt that sits perfectly on the child (preferably not too tight), folded in half, back inside, draw out a pencil. Note the line of the armhole and neck. We get here a dress before.

Now we pattern. Pattern we will be unified for both forehand and backrest product (of course, to some extent, this is not entirely true, but it is possible, most importantly do not sew the back to back, let it be a little loose, especially since the idea model allows, then armhole not will pull). I traced the side, slightly extending it for the convenience of the child, he said the waistline, neck draw a new line, as we will cut with flounce. Bottom draws a semicircle inside – it before, outside – it will back the product. Cut out the pattern, that’s what happens.

For this the pattern to create basic patterns before and back our future dresses.

2. Cutting (Items proposed in accordance with the size of the child’s growth on 98 cm., Depending on the variation of parts dimensions can be modified).
Prior – 1 pc.
The back – 1 pc.
2 parts of the shuttle base fabric by 70 cm long. And a width of 9 cm.
2 parts of the shuttle companion tissue 70 cm. And a width of 10 cm.
1 part for the lower part before the excised semicircle and a length of 50 cm, a width at its widest point to 8 cm.
2 armholes piping forehand and backrest (cutting obliquely) and a length of 21 cm and a width of 4 cm, including allowances.
Gum for the shuttle, narrow, 60 cm long and gussets, wide and 8-10 cm long.
1 gusset piece for a length of 40 cm, a width of 25 cm (volume 48 cm head).
1 item for registration gum 10 cm long and 4 cm wide.
2 strips 70 cm long and 90 cm wide and 2 cm, for decoration and dresses the bottom gusset.
Sam all the slices and dress hem – 1.0 cm.
Impose our patterns on the fabric is pinned in several places, so as not to move out draw out the pattern, cut out.

3. Tailoring dresses
So, to start all the details. The lower part of the flounces, the lower part of the forehand and the decor strips (for the length of two sides) is treated with role-seam. If you do not have such an opportunity, and bends over the edge.
First of all, I would like to draw the lower part of the prepayment. Take the lower part of the strip and for decoration, these parts on upper edge, namely paving two parallel lines at a low tension of the upper thread, contractible yarns on the lower pulling simultaneously (in this case obtained assembly). Shear and grind 2 parts before. Remove the padded for assembly seams. Allowances press out up, we make fun decorative stripes on the front part, as in the photo, and at its center along the entire length. Remove the padded on the strip for assembly seams. That’s what we do: in front of little shorter dresses back, and this simple effervescent bottom
Now just issue the backrest down, folded the allowance at 1 cm, ironed.

We perform the side seams of our products. Gut-wrenching, iron out the seams

We proceed to the processing of armholes. Every piping folded along the right side out. Folded piping pin and stitch shear armholes. Oversized cut close to the weld line, the piping wrench on the wrong side edges, armhole defer 0.5 cm.

Grind short sections shuttlecocks, their iron out. Impose shuttlecock from the main tissue of a shuttlecock companion tissue. Determine the middle shuttle and before dress pin up to a distance of 1.5 cm from the top to the gum. Grind down, leaving room for threading elastic bands.

Our future shuttlecock. We put the gum, collect and distribute evenly. Zastrachivaem place threading gum. Our dress is ready!

4. Sewing scarves
Take a rectangle of fabric for our scarves, overcast edge. Tuck hem around the perimeter of the inside-out, ironed. Take a decorative strip of cloth, to pin up on the edge of the front face of our scarves.
Take the box to gum, long sections of grind, gut-wrenching, gum paste. We fix and stitched around the edges.

Now we collect our scarf on short sections (I prefer the Christmas tree), by inserting between our gum, and the top anchoring, ie stitched by. Our scarf is ready!

Here’s a set we turned! By the beach season ready! Sea met!

Friends, thank you for your attention!
courtesy: livemaster

How to Make Different Kinds of Sleeves

Sleeves are such an important part of clothes as it is one of the first things you see in a garment. They should fit properly and be comfortable to wear as well. Sleeve styles vary greatly with time and fashion.

Fashions of sleeves come and go. One moment a particular sleeve may be in fashion but then they disappear completely for decades to resurface later and become a rage again. I remember wearing loose puff sleeves in my teenage years as it was in fashion; now I cannot imagine wearing them, one because it absolutely kills my body shape and two they are luckily not in fashion

How to Sew Two-layer Latin Dance Skirt

This is a simple skirt, which can be made with low to intermediate sewing skills. Total costs: about 15 euros.

I apologize in advance for the poor quality of most of my pictures. My camera had a lot of difficulty with photographing black fabric.

Step 1: The Pattern

Of course, first, you need to make your pattern. Thankfully, this is super easy. You can use the figure as a guide. So here’s how to make the pattern.

First, you need the hip measurement of the person you’re making the skirt for. My friend is very small and has a hip measurement of 84 cm. Since the skirt is made of lycra which is very stretchy, the actual skirt needs to be smaller. I estimated that a skirt circumference of 70 cm would be OK. I will call this 70 cm the hip measurement from now on. You also need to decide on a total length. Following the example of the skirt in my photo, I chose a total length of about 40 cm. Note that this pattern does not include seam allowances.

The skirt consists of two parts. Two trapezoids at the top, which I will call the base, and a wide, hanging part, which is made from four circles, which I will call the frill.

The base consists of two trapezoids, where the back part has a bit of extra fabric at the bottom. This is in place to make sure that the bum of the dancer stays hidden while dancing. The top width of the pieces is hip/2 ( =35 cm), and the height is the total length/2 ( =20 cm). The extra length is about 5 cm, depending on the bum of the wearer. The bottom of the trapezoids is a bit (about 3 cm for each panel) wider than the top edge. This will stop the skirt from riding up.

The frill is made out of four circles, with a circle cut out of the center, as shown in the figure. The black circles need to be a bit smaller than the blue ones, but they must have the same inner radius since the inner edge will connect to the base. The inner circumference of each circle (c0) must be 1/2 of the hip measurement. This means that the inner radius (r0) must be r0 = c0/(4π) = c0/12.6. So for me, r0 = 5.6 cm. The radius of the blue fabric needs to be 20 cm longer, so r2 = 25.6 cm. The black fabric must be 3 cm shorter, so r1 = 22.6 cm.

Step 2: The Fabric

It is easiest to draw a rough sketch to get an idea of how much fabric you will need. Key point: do not confuse radii and diameters! If you make a skirt with the same sizes as me, then you should have plenty if you get 60 cm of blue (at 140 cm Wide) and 1 m of black. I got 1 m of both.

I got a light quality lycra. Try to get the blackest black you can, and a color that really pops for the lower layer. Bright green, red, or even a glittering fabric would be really cool. It’s an accent, make it stand out!

There is a lot of lycra available online, but in the end, I got it at my local fabric market. I prefer to see and feel my fabric, so there are no surprises in the thickness, color, and quality.

Step 3: Drawing

You will need a piece of dressmaker’s chalk, a cup of water, and a lot of pins and patience. Lycra is slippery, which makes is tricky to work with. If you dip the edge of the chalk in water before drawing a line, it will release a lot more chalk, making the drawing easier.

My lycra is reasonably thin because I wanted the frill to be light. Due to this, I decided to make my base out of two layers. So draw both pieces of the base twice, or once on folded fabric. If you work on folded fabric, you need to pin the two layers together, as shown in the picture.

You will also need two circles of each color, with the right radio (black smaller than blue). I did this by drawing a dot at the place where I wanted my circle, and moving my tape-measure around that dot to draw a circle, as shown in the figure. Also, draw the inner circle with radius r0.

Cut all the pieces (2x front panel, 2x back panel, 2 black circles, and 2 blue circles). Leave a 1 cm seam allowance around the base. Do not leave seam allowance around the inner edge of the circles, or the circumference will be too small. Instead, leave a small allowance around the outer edge. Lycra will not fray, so you will not need to hem the outer edge frill. Cut a straight line from the outer edge of the circles to the center. The figure shows the pieces you now have.

Step 4: Making the Base and the Frill

Sew the front pieces of the base to the back pieces, good sides together. I used an overlock machine with the most stretchy stitch. If you are using a regular sewing machine, make sure you are using a stretch needle and a stretch stitch. Sew the pieces together.

Now turn one of the two bases right side out, and put it inside the other one, so all the good sides are touching. Sew around the top edge to close it off, and turn the good sides outward. Now only the lowest edge of the base is bare, and the edges of the top and sides are neatly tucked away.

For the frill: Put the good sides of both colors together and sew the cut edge as shown. Lay them on top of each other, with both bad sides facing down (good side to bad side). Pin them securely together.

Step 5: Putting It Together

Now comes a lot of pinning. Fold the two layers of the base inward, and lay the top edge (or inner edge) between them, as shown in the closeup. Do not be stingy with pins, this will help a lot. With rough stitches, hand bastes it all together. Like I said, lycra is slippery, and this is a place where the stability of the basting will be a big help.

Using a regular sewing machine and a stretchy stitch, sew they base and the grill together.

And that’s it! You’re done. You made yourself a beautiful skirt.

Step 6: Look at Her Shine!

I’m happy with the result, and my friend is even happier. She’s a wonderful dancer, and the skirt enhances it. Her dancing partner modeled an accent for his own outfit from the scrap of blue that was left over.

Thanks!

courtesy: Frivolica

 

How to sew case for the headphone and different things

cover manufacturer for headphones will not require you a lot.
Time and skills, and make it can be made of fabric remnants, surely you have different scraps, which can be put to use. And our detailed master class will help you with this.
This cover can also be used for storage of flash player or a miniature, here it is already possible to show your imagination. Cheholchik can be used as a pendant, it was convenient to use it, and he was always there.
Let’s get started …

Required Material:

lightning;
main fabric;
Lining cloth;
Nonwoven for sealing or batting;
pattern, scissors, thread and a good mood.

From the base fabric (in this case, and colored dots) cut parts 1 – piece 1, 2 – 2 pcs., 3 -. 1 pc. (Pictured Circuits numbered).
Lining (in our case striped) and nonwoven 1 -1 units 2 – 2 pieces.
Swing 1 about 9-11 cm 3 -. 4-5 cm Details are given with allowances. The size of parts may be changed depending on the purpose for which will be hereinafter used.

As a result, we have obtained a number of parts:

Sleek interlining to the three parts of the base fabric:

Take a semicircle lining fabric face up and put on his zipper, so that the upper edge coincided:

Set top semicircle of the base fabric (also raze edges)

Now the “structure” should flash, departing from lightning about 5 mm (for convenience staple items or stoned)

So we turned one-half of the top of the cover. Similar actions are performed in the second half. Here’s what you should have:
The right side of the box:

Wrong side of the box:

Take preform face up and sew the two sides of the zipper, departing from it 2-3mm. Unzip to the middle and hand stitched back and forth for fixing:

We make a loop at the edge of the lightning. Take part 3, fold the edges to the center and then in half:

Sew part of the long edge on both sides, stepping back 2-3mm.
Next, bend your future loop in half and sew to the place where previously secured the zipper:

Take parts cut for the back side (of the base fabric (dots) and the lining (striped)). Circle, a cut out of the fabric put face down on top of the face we put a circle of lining fabric:

Now all this will place on the front part of the cover (lightning necessarily rastegnut until mid) and stitch around the circle, stepping back 5 mm from the edge:

Carefully cut off the tails of unnecessary padlock and trim allowance circle (leaving about 2-3 mm)

It turns out, stitch along the edge of a round cover, retreating 4-5 mm.

To our was always with us, we attach to the eyelet in the ring!

courtesy: livemaster

How to Make Baby sunhat pattern with ruffles and ties

This free baby sunhat pattern should fit a 6-12 month old; Elise is 10 months old and it’s super cute on her petite-ish noggin. Alternatively, you could easily size this hat up or down on a photocopier. Free tutorial, baby sunhat pattern and step-by-step instructions are all below. Bring on the sunshine!

Required Material:

  • Kathy’s free pattern for a baby sunhat with ruffles and ties (PDF – sized for 6-12 months)
  • 1/2 yard of fabric
  • Rotary fabric cutter, self-healing cutting mat and clear acrylic ruler
  • Good fabric scissors
  • Good iron (like Rowenta) and Ironing board
  • Thread
  • Pins (I prefer glass head pins)
  • Sewing machine

Cut your free baby hat pattern pieces
Print my free baby sunhat pattern. It’s sized for 6-12 months so you can scale it up or down as needed. You can use one fabric print or two.

Cut 4 triangles for outside crown
Cut 4 triangles for inside crown lining
Cut 4 brims (2 top, 2 lining) – cut 2 brims right side up, then flip the pattern so that you’re cutting 2 brims wrong side up
Cut 2 strips 16″ x 1″ for the ties
Cut 2 strips 25″ x 2″ for ruffle

For this tutorial you’re going to sew everything at 3/8″ seams. I usually do 1/2″ seams for my tutorials but wanted them to be a bit smaller for Elise’s baby head.

Create the outside crown and crown lining
Take four of your crown pieces. Line up two pieces, right sides together, and sew along the side. Repeat with the other two pieces.

Press seams open; they will be slightly curved. Pin the two pieces together, right sides together. Sew. You’ll now have one sewn crown piece. Press the seam open. Repeat to make the lining crown.

Create the brim
Grab your four cut pieces for your brim. Now because it’s a bit of an asymmetrical brim, be sure to match pieces together so the brim top will match your brim bottom.

Sew two pieces of the brim together to make the outside brim. Press the seams open. Repeat to create inside lining brim.

Create the ruffle
Sew pieces together on the ends, pressing seams flat. It should look like a large circle. Iron the circle in half, wrong sides together. The right side of the fabric will be on top and bottom now, and there’s now a finished edge and a raw edge. Using a basting stitch, sew two rows of stitching around the raw edge of the circle. I stop at the seams and then start again because I find it’s easier to gather (in the next step). Match the seams of the ruffle to the seams of the brim. Pin. Pull the gathering threads gently to gather the fabric into ruffles. Pull it until it’s the same size as the outside of the brim. Pin the ruffle onto the edge of the brim, raw edges together. Sew the ruffle onto the brim. Place the other brim piece on top of the ruffle piece you just sewed, basically making a ruffle sandwich with the two right sides together. Pin and sew. Turn right side out and iron. Finished brim is 18 inches circumference. Topstitch the brim near the ruffle edge. Sew the brim shut by sewing close to the inside circle edge.

Take out any basting stitches that show (yikes, I had a lot on this one …that’s what I get for sewing fast during naps).

Attach hat crown to the brim
Pin the crown onto the brim, right sides together matching seams. Sew around the crown to attach it to the brim.

On the right side of the hat, iron the seam open so the raw edges are up inside the crown. It’s starting to look like a hat now, yes? Make and attach ties
Fold ties in half and iron. Fold raw edges into that center crease. Iron again. On one end, make a triangle with the ends and fold in. Sew along the open edge of the tie to sew it shut. Repeat for the second tie. Now you’re going to attach the ties to the hat. Find the two sides of the hat. Pin the raw edge of the tie to the raw edge of the crown at the side seams. Sew back and forth a bunch of times so it’s secure. Repeat on the other side. Attach hat lining
Turn lining under 1/2″ along the raw edge and iron. Turn the lining so the wrong side is on the outside. Pin the lining inside the hat, matching seams. Put your pins on the outside of the hat because you’ll be sewing from that side to make sure it looks nice on the outside. And here’s what it looks like inside… Sew it all together, stitching close to the brim, catching the lining underneath as you go. I’m not a huge fan of blind stitching like this but it’s the way I figured out how to do it, so there you go. Suggestions welcome. Tie that hat on and go outside!

Courtesy: Merriment Design

How to sew a beach bag and sun hat for girls

we all want to update your wardrobe and add to it with bright colors! They are no exception and our little fashionista! I suggest that you make with me the summer set of accessories for girls, which is suitable for walks and for going to the beach.

Required Material:
– Cotton fabric in stripes of many colors (or any bright figure), I had the segment size 50h55 cm;
– white cotton fabric, about 60h150 cm;
– colored trim cotton fabric appliqué;
– thread color patches;
– a strip of calico size 8h60 cm, a cut on the bias,.
– zipper length 45 cm;
– glue spider’s web;
– fleece.

And tools: sewing machine, scissors, rulers, tape measure, pins and needles, a pencil or a marker for the tissue. For manufacturing applications need a paper with Teflon coating. I use a basis of the self-adhesive film, which is the torn and discarded. One of her party who, without marking, smooth and does not stick to her gossamer.

Handbag:
I cut out the following details, adding seam allowances:
1. The upper part – 2 pieces.
2. The lower part – 1 piece.
3. The inner portion (lining) – 1 item.
4. Handles – 2 pieces.
5. One particular size of 5×7 cm, for processing the zipper.
All parts (except №5) to duplicate interlining. So far, we set it aside and leave one detail №1 – on it will do applique.

I drew this picture, which you can either print, increasing to the desired size, or transfer from the screen and attached a sheet. Circuits cut.

1. A multi-colored patch of cloth to do with the adhesive layer. To do this, cut the adhesive cobweb right size, put on a scrap, top closing the basis of “self-adhesive” (Teflon side on cobweb) and ironing a few seconds. We give a little cool and carefully separate the fabric from the paper.
2. Then, the part of the polymer layer, translate circuit parts our application pencil and cut. Note that the details you need to translate the mirror!
3. spread the composition of all the elements in the detail of bags and glue carefully.

Sew each element of the applicator or a zigzag stitch, picking up the thread in the fabric tone.

Details, calling to each other, you need to stick and sew in order, starting with the “bottom”. For example, the first on the palms glued and sewn part of the island, then the trunks and then only twigs.

PARTS bags together, iron out the seams.

Fold in half to get the item right sides, grind and iron out the side seams.

1. We form the bottom of a bag. To this end, the side seam is aligned with the fold of the bag. Lay off from the resulting corner and 4 cm carries a perpendicular line.
2. stitched by the intended line, do not forget about the tie. Cutting off, leaving a seam allowance of 1 cm.
3. turns bedplate 8 cm wide.

Further, on the upper edge of the bag, at a distance of 2 cm from the side seams put check marks.

1. On the front side of the zipper by placing it face down, starting from the reference mark.
2. On the other hand, turn down the zipper, without reaching the reference mark, as in the photo.

1. Sew on the zipper.
2. Similarly, we make the interior of the bag: take part №3, sew the side seams and process corners, forming a bedplate. We put ready “lining” within the base, aligning the side seams.

Connecting parts of the upper edge, along with the seam lightning, leaving no gap wired about 12-15 cm for a reversing.

Everted bag through the opening.

1. reduce an into the “lining” top of the bag.
2. Leading the finishing line of the upper edge of the bag while sewing up the hole for version.

Process the end of lightning.
1. Details of the size 5×7 cm folded in half right sides and iron out sew seam.
2. We put the item on the zipper so that the seam turned to its lower side.
3. stitched by lightning and cut off the excess.
4. turn away detail on the front side.
5. Refill the open cut inside and sutured or blind stitches by hand or machine stitching.

1. Treat the handle of the bag. Details are folded along the front side, grind, and iron out the seams.
2. Screw and handle. Open sections at the ends refueled inside and ironed.

Mark location handles: this bag from the center to both sides defer to 7 cm and 3 cm down from lightning.

We sew the handle to the bag, making the tie in the form of rectangles.

We admire the result.

Print out the pattern by writing the image border in A4 sheet. Fine dotted pattern to finish without  Panama.

I cut out the details, adding seam allowances and transfer the reference marks.
Bedplate – 2 pieces.
Crown – 2 pieces of folded.
Visor – 2 pieces of folded, one piece duplicate interlining.
Additionally cut out of striped fabric 2 details size 8h15 cm size strip and 6h70 cm ruffles on the visor.

1. Details visor folded right sides, overstitch, cut close to the seam allowance duplicated parts to make incisions on rounded.
2. Unscrew and to iron visor.

One section of the strips are treated with “Moscow” seam:
Step 1. bend on the wrong side of 0.3-0.5 cm and lay a line close to the edge, cut off the seam allowance close to the line.
Step 2. bent a second time and the second lay-in stitch seam weld or 0.1 cm from it.

We prick on the visor strip, forming a counter-folds and keeping symmetry.

Tack and frill to the visor cut off its excess allowance.

1. Details of the crown folded in half, grind down the back seams.
2. iron out allowances, parts into each other, right sides, aligning seams.

1. 2. Items for folded along the front side, grind, carve corners gut-wrenching. If desired, you can make a long and then tie their bow.
3. We embed between parts of the crown, departing from the lower allowance of 0.5 cm

Tack and grind the cut on the crown, making notches on the stock.

Gut-wrenching the crown, allowance.

Double bottoms detail in the crown ring, combining the check marks. Stitch and allowance.

Gut-wrenching on the front side, allowance, guiding him to the crown.

visor ready to slice the crown, combining the control points.

To prepare a strip of the thin calico size of about 8h60 cm, a cut on the bias. Fold along ironed.

prick or shear from the visor, and allowance.

Turn down, and cut off the excess ends, leaving 1.5-2 cm.
1. Fold the ends inside.
2. is folded to the part of the crown or is pinned

Paving the line of Tuglie, securing at the same time part.

Paving the line around the perimeter of the visor and the cutout, clipping the ends.

We are tying ribbons and admire the result!

thank you!
courtesy: livemaster