How to make beautiful rose flower

First, little ready roses

because I mold slowly doing to 6 petals

Do the same thing a few times

I am trying to do the ass

now, I already like it

pasta machine I did not take

land on a stand for Easter eggs

sepals before assembling twigs

All the work is done, it remains only to collect

That rosette ready. The height of 40 cm.

I would be very glad if someone will come in handy.
courtesy: stranamasterov

DIY Beautiful roses from watercolor paper – Step by step

Beautiful roses can be made from the watercolor paper . The color scheme can be very different, and the use of such flowers in the decoration.

The paper – Whatman “Gosznak”.
These flowers I do of Korean paper, but in the master classes of special use drawing paper, so that you quickly determine the paper.

Prepare a lot of parts, score the petals fold stack. Take a spray bottle and spray water between the layers. Knead the stack of paper, like a slice of dough for dumplings. Periodically check the middle, it is necessary that the paper is soaked in water.
Or the second option – fast. Place a stack of paper under running water, dip a layer. Remove from the water. Use your fingers to distribute water, soak again until the paper gets wet completely. The second option I like the most 🙂
Not very pressing with a wet paper proceed to the next step.

PS: Who has difficulties with the purchase of a composter 5cm, use the template.

The small amount of water dilute the ink. Or sponge type paint with a pad, dip in water and wring out. You can use the printer ink.

Sponzhem (I cosmetic) promakivat movements (such as “Peck, Peck”), color seredinku upper layer stack, set aside, and then the next layer. Thus, gradually shifting into the second half stack of color. Do not be afraid of the excess water and flimsy parts.

Take the second half of the unpainted parts and barely touching the edge dip into the paint.

Painted stack parts mash fingers, evenly distributing the paint. Check the middle, if the paint is distributed poorly, squirts water spray between the layers.

Zakonchiv staining, good water press fabric.
Clutching a stack to one side, dry the hair dryer parts on all sides until almost dry. Do not use a hair dryer to embosinga.

Detail fold. Collecting accordion, make folds.
Hold fingers detail about the middle, hold the edge of the tweezers. Gently rotate only the tweezers until the paper does not slip out of it. If the paper is torn, the more dry the parts hairdryer. Conversely, if the fold is not laid soft – moisten.

Adjust the folds, holding fingers area.

Gently flatten the piece and leave to dry.

When the first deferred parts dried up. can be specks.
Take the ink pad black. Better ink resistant to water. Brush with a short stiff bristles (I from the vacuum cleaner to clean the filter can be pulled out of the tuft brushes).
Vertically holding the brush, make a point movement specks.

While the details have not yet dried completely, use the line with circles and tools, make an indentation in the center, dropping petals on the line.
Leave the parts to dry completely.

Glue the parts, pressing tool in the center.

Make a hole awl. Fold the stamens in half, using a wire.

Drag the stamen to the middle of using the line with the hole, so as not to deform the flower. Apply the adhesive so that then cut the excess, stamens are not dropped. Lower stamens to the desired length by gluing them to flower.

That this result was stained in the center and on the edges. The options really are so many and each flower is unique. Do a lot at once, in stages, it is very convenient and much less time than if you make one flower. The process is very exciting and challenging, boring only stamens inserted.While I was preparing for the master class, so I absorbed that made a huge bunch of flowers for 3 days – 236 pcs. Enough for a year or two 🙂

Keep flowers convenient threading a wire through the eyelets of the stamens. For works by suitable simply cut off.

Hope you like this tutorial.

Origami Roses – Step by Step

To make this craft you will need:

  • Paper of your choice and with the color or with the stamp also of your preference;
  • Common white glue, double-sided adhesive tape or stick glue, depending on your preference for glue to work with paper;
  • Pencil;
  • Ruler;
  • Common scissors.

Tips for Making Origami Roses

Start by separating all the materials you will use in learning how to make origami roses step by step . Cut a square on the chosen paper, with the square with the size you want and fold it several times, creating smaller squares across the square. Fold the ends of the square inwards and mark the center pieces.

Fold the corner inside. Win the song. Do the same with the other songs. Raise the center of the part. Also link the center. Part behind the piece. In one corner, take the center and some side folds.

Put the media in.

Raise the other part. Do the same with all the songs. Take the recessed part of one of the corners. Fold this part. Tape the bent part. Do the same with all the corners and “twist” the piece. Your rose is created. The leaves for your roses can have the template you want and you can glue the leaves at the base of your roses with the aid of ordinary white glue, double-sided tape or stick glue, depending on your preference for glue to work With paper. To make the button, fold another square of paper, but with smaller size, wring the sides, raise the center and twist. (Photo:

How to make newspaper roses frame

To decorate a picture frame, a mirror frame or the decorative piece you want, you can make newspaper roses, which are very cheap to make, since you can use old newspapers that you own at home, they Guarantee that special touch the more that everyone looks for the decor of their home.

To make these beautiful roses you will need:

  1. newspaper sheets
  2. scissors
  3. Common white glue
  4. brush
  5. acrylic paint with the color of your choice.

Start by cutting the newspaper sheets into wide, wide horizontal strips. Separate three strips. And then glue these three strips together, along their ends, forming a long strip of newspaper.

Then fold the long strip in half to crease. Unfold and fold the sides of the newspaper strip inward. Fold in half again. And now you’ll have a long, but sturdy newspaper strip to make your rose. Soon after, form the crux of your rose, kneading and curling the beginning of the strip. Then continue to wrap the newspaper strip around the created core, turning it gently from time to time, to create asymmetry, as in the original rose. And add a little glue on the inside of the strip to secure the piece. Now, continue rolling the rose and crushing it in your hands until it reaches the desired size. At the end, stick the tip of the newspaper aunt to fix. And paint and your rose with the color of your preference and the aid of the brush. And it’s ready!

DIY Gentle topiary with beautiful roses

Gentle topiary with roses 1

For work, we need the traditional kanzashi set of materials and tools: tape, glue, candle, scissors, wire, tweezers.
The picture just tape them today protagonists on our pink ball.
I have them 2.5 cm wide, and can be 5 cm .
 The most time-consuming for me has always been cutting … yes … the pattern decided to do without shabolonov !!! Take several strips of different colors, I cut “by eye” of approximately 2 cm in one pile. To make it clear, at all stages of the photos spread out in rows.
1ryad Cut several strips.
2ryad Slightly round out the two brackets (also pile at once). Note that the tape edge is always the side and top and bottom sections.
3 row melted over fire. Horoshenechko melted so that the petal slightly curled. Bottom nado.Vidno not melt the front side.
4 number of petals.  Do not be afraid number. It’s not scary and not long! Melted need only one side.  That’s all done! We do not even tired!  You remember that we’re going to the prom?
We select outfits in color. At each rosette I need 12 petals. You can do a little more or less. When I cut the ribbon advance’m rough count to 12. While the glue is heated counted out the petals …  The first petal curl up into a tube underside.  On the second and all following petals drip two tittle glue … on the front side.  … And wrap our “straw.” Follow to 1lepestok not appeared above 2. Otherwise, your roses will be long-nosed.
I collect the sample onto a different color.  Again – glue and third petal embrace the first two.
At the bottom of pussies do not pay attention.  … More …
So, until all 12 are not embrace.  Here they are already ready to waltz whirl.
Look what little nose peeking out seredinok.  This “tail”. Right Shaggy and they stick out length of the cone, and I left them shortened. So stick to the ball easier.  Now prepare the basis for the trees. Can Christmas ball, and you can collapse Bun paper and wrap the thread. Threads are no sizing, because hot glue when gluing roses and leaves all fasten tightly. The length of the wire is determined by taking into account whether we Stalks bent or straight.  Before gluing flowers foot -cool, sticking to the bowl and wrapped with a tape 1 cm. Wide, securing with glue.  Here they have already gathered all together!
But so far no green leaves.  For leaflets and samples. This trimming of the floral organza. As I like it! Mohnatenkaya such … With glitter silk interesting combination is obtained.
Now they need to find suitable pots.  Well, my Crank your house warming already right.   Here it is in all its glory. … Soon they will scatter your sapling.