DIY: Khokhloma in quilling techniques

KHOKHLOMA IN QUILLING 1

If you do not mind, I’ll show you how to do your job. Maybe someone else interested. First made (on the picture found on the Internet) berries. Then transferred them to the black cardboard. Berries gathered here in this way. Stripes 2 cm. The width of 1.5 mm is wound and gave them blossom. Strongly they were dismissed because the paper density of 130. Well, then how did you see droplets. And of them was a berry. Then I collect leaves. Painted sheet of paper under the film. And on it long glue droplets,,,, Black rim glued in half, but not until the end. In the crook of loop turns, these loops are glued to the center. Due to their central vein is obtained. The size of droplets is different. I tried to fit into the picture That leaves all ready. I begin to perform curls. And redcurrants immediately began to play, right? That’s what happened in the end. And now show closer on all sides.

How to make floating cup with quilling technique

Floating cup Quilling technique 1

Today, we are creating plenty bowl. I’m sure you’re familiar with this popular man-made souvenir that is also called “floating cup.” Do it from a variety of materials, remain unchanged only the cup and saucer. As for us, we will focus on paper decorations – flowers and butterflies in quilling techniques. How to make a cup of blooming abundance with their hands

Materials and tools:

– Cup and saucer;
– Rigid wire or unnecessary spoon (fork);
– Thick green paper;
– Paper quilling;
– Quilling tool;
– A pair of scissors;
– PVA glue;
– Melt.

First of all prepare for the cup and saucer, will wash them thoroughly and dry.

Take a rigid wire (I – double copper). Instead of the wire can take unnecessary plug (quite tough, not of aluminum).

Bend the wire, giving it’s a form of:

A Dense green paper well crumples, and then smoothes – it’ll drape the wire. Wire wrapping paper. We attach basis for quilling composition suitable form.
One end of the blank is glued to the saucer via Melt. Give the glue to harden properly. The second end of the wire into the workpiece is pasted plates. Beautifully draping paper. Making flowers dandelions. Take a strip of yellow paper, with a broad end and a narrow one from another. Cut her “grass.” And, since the narrow end, to roll the strip to curl. Unveiling the bud and get a dandelion. From rolls of dark green color and the elements of the “drop” blue crocus buds do. Glue the flowers to the heart of our abundance bowl, prepare the composition. In a cup of “planting” butterfly quilling technique, made in an appropriate color scheme (as do those of butterflies, you can remember It would be possible to completely close the green background with flowers, but I felt that a part still to be seen.You can also use other colors to create quilling abundance bowl –  help you with this. Do not limit your imagination and you will succeed!

How to make cock from quilling paper

Wonder Cock 1

Time is already late, but tomorrow it will be exactly once! It would like to see our young talent and handicraft have seen this work. It is a pity, of course, it’s too late, I did it, but the astrological Year of the Rooster begins not on January 1, but much later, so that we can try to do more!
Getting Started: quilling we need – strip – raspberry, orange, blue, blue, green, black, yellow and red; hot glue (or glue Titan), pattern, light-colored cardboard, comb. I chose here this cock. I took a picture on the Internet and print, but it did not work for me a bit and I did “simplified”. So I was more arranged. Cut and paste the template. So I worked on a hairbrush. How to make feathers look in my other works, everything is very detailed written. Begin to make the tip of the tail and glue series to tulovischu.Pёryshki similarly placed in the “Firebird” (tail) Then the crimson feathers. Orange, etc. The tail end. Now we start to lay out the body. Making the wing. First, sticking blue feathers, and then spread. torso. Please note that the below little feathers, and the higher more than larger ones. Again, attention! See how a circle around the eyes, feathers are arranged on the head. Scallop I made very simple. It does not become complicated. Wonder Cock ready! I did not write much. On the picture. I placed all very well seen!

Beautiful asters quilling

ASTERS QUILLING 1

Side view. Flowers closely. Work on gathering silikon. “How fast shear” teeth “and make “.
Take 1 sheet of paper, folded along. Once again along. The last turns of the strip .Shirina 2.5 cm. Cut the fold And just 8 pieces set! Because so many pieces I made one . them one after the other: 1 yellow, purple and green 6. Screw, periodically spreading glue. hen turn down the center of his fingers. Then tighten up the scissors to the center. Side view. Tip: To get the back straight, the yellow strip, I Screw on the needle, and then all rukami.Roll then turns denser. Changed the green strip on a lush grass. The flower aster below lush sepal. That purple , they are ready for placement in the basket. And zhёltenkie also ready. in the form of TC on manufacturing listikov.Esli something is not clear write. Basket on a basket fone.Pobodnuyu saw Ina in her blog in July rabote.Ochen she sunk into my soul, and that’s done in his own way.
THANK NAIS, HUGE! Work ready! Oh, like a bouquet of asking in a round picture frame! But no! It will live long in this!

How to make quilling frame of cardboard

Quilling frame of cardboard with his own hands for a photo 1

Photo frames can be not only a good interior decoration, but also a wonderful gift close. They can be bought in any store or made from scrap materials with their own hands. The most available material, in this case, can be regarded as paper.

What would have been our quilling frame of cardboard with his own hands for a photo, we need a multi-colored cardboard, glue gun, glue PVA, stationery knife, paper quilling, quilling tool for.

We start with the fact that the inside of the draw colored cardboard the size of our future scope of the decor. Then take the knife and carefully cut the frame. Now we need to take the glue gun and glue together a piece of cardboard and a blank for the frame. Apply glue should be at the very edge of a board that had a place to put pictures. What’s more, plus the use of glue gun, it creates a small space between the sheets of cardboard, where he will continue to post pictures. Now you need to make a stand for the frame. To do this, take the cardboard and cut the shape out of it as shown in the photo. Bend the edge of the figure so as to remain within the middle of a width of about a centimeter. On the back of mid-Apply glue and glue the base to the frame. Now we can proceed to the decor, which is made in quilling techniques. To do this, we need to take a quilling tool. If you do not exist, it can be very easy to do out of the ordinary toothpicks. To do this, take a knife and carefully cut the edge of the toothpick. The tool is ready. Now we start to do the flowers for this we press the edge of the paper to the toothpick and turn loose circle. Then presses one edge of the circle to get a drop. This will be our petals. Do not forget to glue the edges of the paper PVA. With the help of glue, PVA collects flower of six petals and decorate the middle of a simple yellow circle. Sticking flower to the frame. Making other flowers. To do this, twist the loose circle, and then Fold the two edges up, pressing the middle inside. We supplement this flower with green leaves, drops and connect it with another flower strip of green paper. In the same way, we do the flower of a different color and fasten it at the top of the frame. Of the green paper, folded together a few times, do list, which is attached to the bottom of the flower and composition complement one another leaf and twig. We glued together several strips of green and fasten them to the bottom of the flower. Fold the branches, simulating the vine. Do not forget to capture all the glue. At the edge of the upper twigs fastened little flower from simple circles. The frame is ready. If you wish, you can complement the decor more details.

How to make quilling photo frame step by step

quilling photo frame 1

This work is very simple but with a little effort, you get a wonderful gift made with their own hands Materials:

For this work you need: flat 0.3cm blue and yellow for the petals of the iris (the color, you can choose any of your choices), strips of green leaves and shades of different colors for. Strips “Fuzzies” width 1cm, 0.7cm, 0.5 cm of any color of your choice. A strip of green 0.5 cm for clearing the border. (By the way, I have the strip of office paper). Paper watercolor background, thick cardboard for the stand, PVA glue, scissors, quilling tool or a toothpick. “Fuzzies”: from whole strips 1cm – 5pcs, 0.7cm -2 pcs, 0.5 cm -2 piece,
“Daisies”: from whole strips 1cm – 3 pieces, 0.7cm – 4 units
you can make a variety of sizes, colors, and shapes of your choice and mood. Depending on the size of the strip (width may be 0.5 -0.7- 1- 1.5 cm 3, and an entire length or ½, 1/4) and “Fluffy” of different sizes are obtained. Fringe is made as follows: the desired length of the strips cut from one edge along the entire length, leaving about 2 mm uncut. We try to make cuts as close as possible to each other, it will give the “Fuzzy” more natural look. To speed can be simultaneously cut into 2-3 strips. Then cut into strips curl up into a tight roll, we fix the bottom of a glue and glue after drying fluffs.
You can combine (superimpose on each other), two tassels of different colors and twist them together, you get  “pussy.”
If a strip of fringe 0.3cm stick and start to roll with the 0.3cm strip, then turn “daisy” and, depending on the lengths of the bars and midway flowers themselves are of different sizes. Middle, get striped if you connect (apply) strips of different colors. Instead of a simple strip, 0.3cm can take the fringe of smaller strips. For example the main fringe of 1cm strips, middle, and – 0.5 cm. Glued together strips, begin to wind a smaller fringe into a tight roll. In the finished roll straighten the edges and do not touch the middle of a.
These are different Fluffy – is where carousing fancy. Leaves.
For branches, twist the 40 petals form “drop” from ½ strips. Springs collect, how in the photo. In order to collect the leaf, must be green stripes 0.3 cm folded in half and glue. Then it is necessary to make an incision of 3-4 mm (get a “slingshot”). And it inserts “drop” – this is the height of the sheet.
Then glue the strips along the left and right of the subsequent parts “drop”.
We need more and some leaves – a 16 “drops” of the entire strip, 14 – ½ of the strips and 6 – from ¼ strips. Irises.
To glue the petals entire blue stripes and half yellow. We turn to roll it to dissolve the d.15-16 mm, making the shape of a drop, and we bend it slightly (6 pieces). For the upper petals (6 pieces): twist the whole blue stripes, roll up d.13-14 to dissolve, then squeeze it in the middle, let go and then we press the edges, giving the shape of a semicircle.
For the buds of blue strips ½ twist the shape of a drop (x2), and 2 parts green arrow in the form of halves 0.3cm strips. Blue bud pastes it into a green arrow. Arrow: ready “drop” it is necessary to pinch between the thumb and forefinger of his right hand and fingernail thumb or forefinger of the left hand to press down. Then, without releasing the drop, hold it over the entire length, thereby fixing the resulting new shape.
Peduncle (3 nesses) of whole green stripes make the shape of a drop, then we hold it between your fingers and press down the top – get the triangle.
Collect flower: flower stalks to glue lower petals, and then the top. To stem green bar 0.3cm must be folded in half and glue and glue the ends of the two sides to the peduncle.
All items are ready, proceed to assembly. Take a sheet of watercolor paper (I have the size of 21h15), toning background of dry pastels (crayons, pencils) as in the photo, it is necessary to use a knife to make shavings pastels and rub it on the background cloth (cotton). Bottom reserve white. After the background was painted, glue with glue PVA border clearing – 0.5 cm strip giving it the desired shape (curved with an awl or skewer note the location for the photo or corners sticking to him. Glue the irises. The leaves of irises do as loops of conventional strips. Please try on, which will host the leaf, cut the desired size, glue, and so on. Now we go to the meadow. Please suggest decomposed leaves and flowers, so to speak by example. And then collect on glue. To work was neat, glue the like can be more careful, do not rush. To work, you may need tweezers. Putting it gradually, in parts. And at first glue the leaves and then flowers. And at first glue the leaves and then flowers. They collected one part, go to the next. At the end we inspect the work, adding, where you “drops”. It remains to glue the frame to our stand of thick cardboard. Here is photo frame and ready to – make a great gift made with their own hands Here is photo frame and ready to – make a great gift made with their own hands

How to make Daffodils from quilling technique

Daffodils from quilling technique 1

Daffodils from quilling technique

 I present to you a craft on production of panels and postcards “Daffodils” in the technique of quilling (+ modular origami) using flow charts.

Materials: colored paper, colored cardboard, paper quilling, ruler stencil, toothpick, tweezers, PVA glue, glue “Moment”, a pair of scissors, a ruler, compasses, scissors curly, curly punch. Step by step description of the work:
1. Production of cards.
The basic element of our cards is narcissus flower in quilling techniques. For the manufacture of parts of the flower use technology card number 1 . 1. From ready-made strips of paper quilling, with a toothpick, twist tight roll.
2. Tight roll ready.
3. Dissolve roll on special stencil to the desired size.
4. Edge glue adhesive.
5. Make free rolls.
6. Surrendering free rolls on both sides, forming the shape of a sheet.
7. To produce the right amount of small leaves. Make midway flower on the routing number 2 . 1. Folded paper in two horizontal layers 1 cm cut.
2. Cut into small noodles free edges.
3. Using a toothpick twist roll with fringe, occasionally with white glue for bonding strength.
4. Fold the edges. Seredinka flower is ready! details ready. We will need 6-9 petals white middle, 1, 3 large green leaf. Glue the parts together to form the flower and leaf. By routing number 3 to make a flower bud. 1. From ready-made strips of paper quilling with a toothpick, twist tight roll.
2. Tight roll ready.
3. Gently squeeze the roll center – turned sepals.
4. Fill with white glue for strength.
5. Insert the roll sheet. Dry.
6. Craft Bud 2. Stick the stems. Elements flower ready. Basis. To obtain a basis to make a square shaped .
Draw a square with sides of 14.5 cm.
Carry out diagonally.
From the center of the intersection of the diagonals draw a circle with a radius of 5 cm. Cut the square and the inner circle curly scissors.
Angles issue figured punch. Details cards ready. 3. Assembly. On the basis of bright stick shaped square. Glue the flower and leaf glue “Moment”. Glue the flower buds. Card is ready! Well, stylish !!! 2. Panel “Daffodils”.
To produce panels on the routing number 1 to make 18 pieces of leaves in white, on the routing number to make 2 3 midway.
For manufacturing we use the leaves of the technological card number 4 1. combs secure with PVA glue the first round of paper quilling.
2-3. Make the length of the necessary number of turns, each time increasing the distance of 3-4 teeth.
4.Zakonchit sheet, glue the edge of the paper.
5. Remove the sheet from the combs.
6. Gives the sheet the desired shape. To produce a sufficient amount. Details panels ready. Glue panels on the bright parts based with glue “Moment”. For the manufacture of frames required triangular modules in the origami technique.
Produce triangular modules routing number 5 . 1. Fold the rectangle exactly horizontal.
2. Fold the rectangle to define the vertical center line to deploy.
3. Bend the upper edges to the center line.
4. Turn over.
5. Fold the lower classes up the drawing.
6. Curl on drawing.
7. Fold the lower classes.
8. Fold the corners of the folds, bend the lower classes.
9. Bend the triangle vertically.
10. Triangle module is ready! To make the frame modules red, yellow and orange in a sufficient amount. Assemble the modules by inserting into each other, rounding, alternating colors. Assemble the frame, glued on panels. Done !!! “Daffodils” in the interior.