How to make beautiful pink angel from bead

pink angel from bead 1

Required Material: the wire is very thin, the best of cable, a little – sm20- silver wire on it will strengthen halo, 1 large white bead for the head. Cap for beads, Round businy5-6 mm. 3mm beads or large beads, preferably rice, but you can do without it,

We print on a piece of the wire length of about 80 cm glass beads and in that order … Keep paetki from the middle were rotated in different directions

Through extreme bead to make a loop … Such loops have to do 5 to 6 pieces

Here is what you should have. Postpone our billet on the skirt

Let us turn to the wings. In the middle of a piece of the wire length of about 50 cm recruit bead 3mm and rising ‘.When using beads, the beads must be a big hole, because, through it, the wire should pass 3 times. Making the top of the wing. Gaining 6 beads and pass through the second of the Risin. We repeat again, each time firmly tightening wire

That’s what happens. Next, we collect 7 beads. Now the loop is obtained from 4-beads

Recruit 5 and beads. missing the top, go through the previous one. In all the work it is the hardest part is necessary as it should tighten the wing. Recruit 2 bead wire and hiking, as photo.Zatem 7 pcs and do a loop of 3 beads

Finally, 12 beads and pass both the two pictures. Do not forget every time tauten provoke.Zatem 5 beads and go through the bead on the rising ‘. Similarly, do another wing. (The longer to write than to do). Lay off the wings and move on to the carcass

In the middle of the wire about 30 cm long bead stringing. Then both ends are passed through a cap for beads and large beads Risin. We are pushing the ends of the wire

We form the handle and tighten bead 4-5mm

Tightly-to-back wings and putting a whole bunch of wire is passed through a bead

Twist the carcass and skirt. That’s our angel looks from above,

And under her skirt

Then we make out the bottom, catching beads on a thin wire, twist and hide the ends

To fasten the waist halo. It turned out Angel. Under this scheme, you can make a fairy, butterfly (changing the wings), but you never know what the imagination will suffice.

 Thank you inspected and read to the end. If someone decide to do or have any questions – please contact. It is not necessary to follow exactly the pattern – this is just an idea. How to translate it – you decide

How to make children’s kitchen set – Step By Step

childrens kitchen set 1

The base plate big box of children’s highchair.
Mark up the pencil, a stationery knife was cutting, self-adhesive paste from wallpaper store. It is also used adhesive tape shopping (gray Scotch type, but few stretches), glue point – liquid nails,
beginning

like this in the oven for a device. At the bottom 2 layers of thick glossy magazines for the severity and stability of furniture. All plastered with tape

As an ordinary plastic bowl sink

In the role of handles plates, cork from bottles with cut off neck

so look inside the handle

as well as outside

on oven

so the inside

it is from the inside with the lower compartment

taped to the front socket on the liquid nails thick cardboard pasted film, self-adhesive

for burners her husband CDs

crane used for the handle on the balcony door bolted to pack cartons (in the form of a cube)

All these pens from the store (p 30-40)

well, buy more products and a grandmother, she was so inspired by the idea that bought Dimona and the dishes and products.

Here the comparative size, Dimon fits under the sink:

Well, in general, and all!

Ask clarifying questions. I will answer with pleasure!