How to make beautiful bench for toys

bench for toys 1

work needs:
-fanera 6mm
-palochki for eating sushi
-Bamboo napkin
-kley “Moment”
-shkurka abrasive
-balonchik paint

I took a 6 mm plywood and painted just such a preform sidewall bench and cut her jigsaw, then mark a point for insertion of stiffeners and drill  – 4 holes.

Here’s what happened – but I know that you will bear with me and little Kosyachkov not notice …
Now is the time to remove all burrs and barbs – for that I took, abrasive sandpaper and grind workpiece edge.

The holes that I drilled – put rods of land, slightly eroded tips, pre-lubricated and sticks and holes glue “Moment”, who says it was necessary to take the PVA, but I got used to working with this adhesive.

It has turned out here is the base – is the glue is not frozen – it is necessary to equalize.

On the edge of the sidewall nano she again glue “Moment” and wait for 5-7 minutes.

And then I put a bamboo napkin and strongly pressed.

We need only look to the napkin is flat.
 And now we have to paint it – took the paint, I like balonchike, easy to apply, dries quickly, and color stable.
eleven.
 That’s the end result – a bench for -zo lotis Togo color toys.
 And of course my new inhabitant Mishkin house

How to make a bed for Barbie dolls – Step By step

bed for Barbie dolls 1

Today we talk about a double bed for a loving and gentle doll couple.
And it was so ……

Look, conceived I then himself bed make sketch already sketched out … How do you help?
– Why not help – smiling Max – with the right!

they took a piece of polyethylene foam

chopped and glued glue “moment”, but followed that to the length and width is the just right bed was

How well that a close friend is always ready to help!

that lie, both on the beach ……

the back of the bed is assembled from three elements

sheathe her pink crepe satin helped herself Julia

feet bed carved solid, stable, from the same polyethylene foam. and also sheathed with a cloth.

When the legs and rest were sewn to the bed, it has become more or less finished look

Gleb does not miss the opportunity to feed Julia light dinner on the new bed)))))) (for some reason he always thinks that she eats little)))

from a piece of foam on the bed sewed comfortable mattress

A top – a sheet

She lay down good)))

Blankets have the very thing that Julia embroidered Gleb freebie

And now – the fun !!! Top cover – for beauty which is embroidered with lace and pearls and sequins

And the amazing thing … !!! On the underside, the white side also got a good result!

Sew to the veil “apron” and admire the white side

Overturn veil – and get pleasure from the pink side

now sew the pillow … look at it … surprise grimacing, frowning, twisting his lips and a puzzled trying to understand how in a time of sewing one small pillow at the person might abyss all sense of proportion and taste … yeah … we refer to this product in the trash and safely it to reset:

the pillow we come from a very different end – make them as cover – two-color – large pillows for dad-bear (pink side)

and white

Medium pillows – to bear mom)))) pink side

and a white side

and very tiny pillows for a little Mishutka))) pink face

and white

So we get two completely different design of the bed – soft like a peach petal – white

and rich, luxurious – pink

Julia already was putting the last pillow and suddenly: “Oh-oh-oh-oh-oh !!! Hleb, CUTE, IMMEDIATELY CALL Aunt Frida !!!!!!! “-” Of course, my dear, is already calling that, beginning “(and he even scared)?

Aunt Frida arrived promptly helped and three hours later we had a girl

Gleb could not hide feelings – “Dear, you have me so well done, so clever !!!!!!!”

My Girl, I love you

How to make organizer for the little princess – Step By Step

organizer for the little princess 1
Let’s start with the fabric selection, which we need. I developed a custom interior, where the requirement was a combination of pink and light green colors.
We need: cotton fabric, soft and hard Dublin, cotton insulation and padding polyester, lace, satin ribbons and rep and, of course, all the sewing tools: scissors, ruler, centimeter, etc.

 Let’s start with the basics organizer. Ready my pockets size – 13×120 cm, so we cut out with SEAM 15×126 cm rectangle from the heater and two rectangles of cotton.

 Then we put a rectangle of cotton face up to a heater, shear pin and sew on the machine around the perimeter with an allowance of 1 cm from the edge.

 Postpone our billet in the direction and take over the production of pockets. 5. I’ve got two of them 15×20 cm and 23×20 cm three volume.

 In order for our pockets in the finished product to keep the shape, I glue them tight soft Dublerin using iron.

 Getting to the decor of the first two holders. They will be with hearts. Because I desired tissue cut out 2 squares of about 10 to 10 cm and sealing their hard Dublerin.

 Then, I draw a heart pattern and translate it to the wrong side of the squares.

 Cut hearts, and I get kind of application.

 I put my heart right in the middle pocket and stabbed with a pin. Then I put a line on the zig-zag with a very small step and obmetochnym stitch sew heart to afford, while still pristrachivaya pleated lace. If you are a beginner or are not confident in their abilities, then you can first tack lace and only then stitched heart on a typewriter.

Here’s what I got:

 Then I tie a small bow of green satin ribbon, burning the edges and sew by hand to the heart.

 Edge will treat pockets, satin inlay on the bias.

One pocket is ready. Getting to the second. Here a little easier, we just sew heart to the tissues without lace.
And that’s what we get:

 Next to the upper edge of the pocket sew lace, putting him in the fold.

And as close inlay cut on the bias.
That’s what we get:

 Getting to the other pocket. To me it was easier, I put all the strips of fabric, lace and ribbons to approximately know which strips where to apply.

Previously I handled all sections of the strips under the serger
Getting to the third pocket. The treated green fabric strip length is twice the width of the pocket sew lace 0.5 cm from the edge.

 Then I collect r: first laid at a typewriter with a long line of steps, and then tighten to the desired length. This procedure I will make all stripes, so in the future I will omit it.

Sew stepping back from the edge of 0.5 cm.

 Over sew ruffles lace stitching zig-zag so as to cover the cut ruffles.

 Handle inlay cut on the bias.

 Getting the following two pockets. We produce the required number of frills and lace fabric.

Next, using a ruler and chalk mark the band, which will be placed ruffles, depending on their width. The width of the strip mine was from 3 to 5 cm. Pay attention to the width of the strips should be such that each upper almost covers the upper edge of the bottom frill that was not visible place.

Sew ruffles, starting from the bottom.
In this pocket I kept away from the top 2 cm from the top of ruffles + 1.5, visit the hem edge.

 Then cut the clothesline gum equal to the width of the organizer, ie 15 cm.

 Close the elastic double hem and sew it zigzagged, pulling parallel.

Ready pocket is gathered from above.

 By the same principle we do a second pocket, but here I use a large number of bars and top stitched lace 1.5 cm from the edge in such a way that after the hem lace was on the edge of the pocket.

We sew the elastic exactly as in the previous one pocket. Only now we will have lace on the edge.

Well, all of our pockets ready. Now we take the basis of organizer pockets and decompose in the order that we like the most. The photo shows that there are pockets that are wider than the base.They need to be prepared.

To do this, stabs folds with pins, stepping back from the edges of the 2 cm. At the very crease I pledge to 4 cm on one side. This will be the volume of our pockets, it can do on your own a little more or less.

 Then, based on lay off 5 equal portions and draw a line, which will be secured our pockets. I retreated from the bottom 5 cm and bases noted line at a distance of 23 cm from each other.

 Applies the pockets to the selected strips treated edge downwards organizer vvezh underside.Stabbed with pins and sew pockets to the base, with an allowance of 1 cm.

 Then turn down pockets stitched into position, stabs edge pins and stitched by all organizer perimeter edge pockets.

 In pockets with ruffles trimmed with scissors cuts, sticking out from the sides.

 Then take a second strip of cotton, puts her face to “face” the organizer and pinned down, most often fix the pins are the places where there are voluminous pockets. This stage requires accuracy, meticulously, the fabric should not move or stretch. The newly stitched by the organizer on the perimeter with an allowance of 1 cm, leaving the top edge for eversion.

 Next wrenched organizer and sew up the top slice. Then sew ribbons rep, who will be suspended for the organizer, buckle edge and sew it

 The resulting insert piece aluminum tube or rail, or thicker wire, or even the old line – all that you will have at your fingertips, it is pre-sawed off 12-cm length. A firm foundation is necessary for us to ensure that the organizer is not formed at the hanging.

 Already ready organizer casts a critical eye, and add the necessary touches. I have this satin bows on the pockets. I wanted to add here.

 Ready organizer especially on the side folds pockets and enjoy the result!

For his pockets I sewed another textile hearts.

 I hope you enjoyed the master class, and there are fans of the business who dare to repeat the feat with numerous bows and ruffles.

How to make nightlight for children’s room – Step By Step

nightlight for childrens room 1

We offer you a nice idea of ​​manufacturing a nightlight for a child’s room in a Winnie the Pooh with balloons. Mishka offer blind from salt dough, and the ball is made of thread and glue (previously we have not once described the process of making such balloons)
To produce a nightlight for the nursery, you will need:
FOR THE BALL:
– Balloon;
– 3 spools of thread + PVA glue;
– A large needle;
– Wire, black electrical tape;
– Lighting small + cartridge under it, plug wire.
FOR Winnie the Pooh:
– salty dough;
– Paper, foil;
– Toothpicks,
– Gouache paint and varnish.
Nightlight for the nursery step by step:
Pierce tube with glue and insert the thread ( picture  2). Then wrap the bead thread (photo 3). As a result, you get the appearance of a “cocoon”, leave for a few days to dry (photo 4).

Pierce the ball and remove the residues (photo 5).

Make two balls of newspaper (for the torso and head) (photo 6). Wrap them with foil (photo 7). Now spread the dough, and for the best bonding between the balls you can use a toothpick or a piece of wire (photo 8).
Just shape of the orbit (eye deepening) (Photo 9). Make a muzzle (photo 10). Mouth with nose and ears (photos 11-13).

Secure yourself the edge (photo 18). Next, create the slides, flatten, try, remove the excess. This will be the most interesting point in the work, because the bear appears the mood and character (photos 19-21).

Make paws on the principle of body manufacturing. Newspaper wrap foil (Photo 22). Clung to test and insert toothpicks (Photo 23). The paw to slide wire, which is attached to the lamp cartridge (photo 24).

Secure the wire holder (wrap the wire around – chuck will be as if inserted into a ring of wire), cut into a “cocoon-bowl” hole required to accommodate the bulb with holder and sew the thread to the frame wire. Next, connect the wire and the wire together by wrapping them with electrical tape (photo 25). The wire remains inside the legs, holds the empty top (photo 26).

The ball can turn unstable, so the circle at the bottom need to add stiffening using toothpicks. You can also consider a successful design of the ball.

Nightlight for “Winnie the Pooh” children’s room is ready!

How to make rabbit – Step By Step

rabbit 1

Technology all the familiar and beloved by me – papier-mache …

wire in the ears immediately to shape and bend …

sticking out of the bottle went very well for the brisket bunny …

finishing layer of white paper …

painted the colored acrylic paints, patterns caused by a loop volume silver …

cilia-black construction paper …
nose plaster paste for modeling …

tied bows, gave balls and ready to Sugar!

I hope my work will inspire you and like creature !!

How to Make Origami Snowman

SNOWMAN ORIGAMI 1

Required Materials:

– Role of two different colors, preferably thick

– Cardboard

– Painting

– Scissors

– Glue

Procedure:

Step 1: This little pig is always performed with the same piece. That is; you will create 350 pieces of this type. You sufficient follow photos.

Step 2: Once you have made at least half of the pieces, it is time to put them together. Each row consists of 23 parts. Step 3: When you have reached the sixth row, you must reverse the way in which the pieces are placed. Step 4: Once you have added six more rows, you must create the ears. In this case, begins is five pieces, and then 4 ends 3. Step 5: Now just must draw on cardboard muzzle, eyes and pig wings. Cut them out and glue.