How to make case book tablet

There is a new age technology. Almost every day, they invented and produced in the world, new models of smartphones, phones, tablets. All these things are in demand, and in many cases, necessary for a modern inhabitant metropolis.

Everyone who has bought himself a brand new model of the long-awaited phone or tablet, tries to keep her safe and sound.

In order not to break and once again not to claw their equipment in stores acquired special accessories in the form of protective films, trinkets rubs, covers. Many of these things are not quite expensive, and some you can do, and the price a brand new handbag.

But there is always a great low-budget way out – it’s accessories made with his own hands, that is hand-made.

In this article I will discuss how their own from old bags, cardboard and a couple of patches make a real case for the tablet form of the book.

You need to cover:
– Cardboard
– Scissors
– artificial or natural leather (I got the best of the old bags)
– cloth Lining (better to take a non-slip, and a thick cloth in my velor)
– glue “Moment”
– super glue
– glue term-gun
– laundry gum , black
– Velcro

This book cover for the tablet I took just half an hour. Cover needed urgently. And I’m not to waste money, I decided to do it herself.

I was useless bag that I carried by only a month, and then she broke the lock. Throw felt sorry, and I just put it to the best of times, that is, until, when I reach the hands to fix this unfortunate clasp. But the hand did not reach the whole winter, and gathering dust bag and hung on a hanger.

I never thought that once dare to reshape it and make a case for the tablet. But thinking what to do for the cover of the book-cover, I immediately remembered that same purse.

Then I died, if suitable for the size of the side of the bag. Everything was in order, so I cut it from the appropriate box. Then found a couple of patches for padding. I took glue Melt, eraser, scissors and cardboard.

Immediately I say about cardboard. Cardboard is better to take a tight, not brittle and not fat. Unfortunately, my board was quite thick, so the case has turned out not quite thin.

Another point. If you have a thin plastic, you can use it. I think it will be even better, because it does not soak in water and cover can be washed.

Well, like a prologue finished, now I will tell you how to do this cheholchik.

At first I looked around the plate with a pencil on cardboard.

I cut out of cardboard two equal parts.

Then she took a linen gum black and made from it the holders on the corners of the cardboard backing.

Then she took a linen gum black and made from it the holders on the corners of the cardboard backing.

Glue the two pads to the piece of artificial skin, cut from an old bag, stepping between them a distance equal to the thickness of the tablet.

After that, cover cropped to the desired size, and by bending the corners and put them on the glue.

From the mounting of the handle fastener made by gluing on the edge of the Velcro, and set him on a super-adhesive back strap.

That’s all – ready for a tablet cover! Source

DIY: Beautiful Desk Organizer from Cardboard

It’s summertime, and sometimes that means that your desk is probably more cluttered than before. Time to make Desk Organizer that can be put almost anywhere – from the bedroom, the living room to even the bathroom!

Wonderful solution for handy people. Of the few pieces of cardboard, rolls of tissue and several items, you can create a very handy personal organizer for the student. I really liked it, do not you? Below the video workshop. I wish you all a good mood!

How to make a recycled cardboard dollhouse

recycled cardboard dollhouse 10
RECYCLED CRAFT: An amazing dollhouse from cardboard.

What I share with you today are of those things that when I see for the first time leave me speechless. Unique things, creations that surprise you completely. What they see is a beautiful dollhouse … I can not believe? I was like! But let that show them.

This is a very special creation. It’s a dollhouse Victorian style . Its creator, Caroletta, is a lover of houses for dolls since childhood and this creation took him a week to do it.

All emerged as a concern of what could be done with materials he had at home, which was similar to what she did small to make their own dollhouses. And came leverage a cardboard box that had made purchases online.

The result is a true work of art, is not it? At the base material, the box, he added papier mache, acrylic paint and wooden sticks.

I can not help but feel admiration for your work! And see a step by step how he did it.

Hope you like this tutorial. Stay tuned with us.

DIY: Decorative art Paper-art: Sac

Paper Art Sac 1

Bag-bag is performed using several techniques: cardboard, paper art, and quilling.

And now  started with drawing.

We connect with the front of the  part consists of a rectangle 62cm  26cm. rectangle into 3 parts as follows-Face (23cm 26cm) – (16cm  26cm) -Face (23cm  26cm) leave facial parts gives bend to connect with the convex side. View from the clearly visible bulge. Now do  the cover. The central part of the lid. Connecting parts. Consists of two parts. Inside. We do estimates. Well, ready to frame. Front view. Houses a lot of flowers left by past work and I decided to find a use for them in the work. Black paint them with acrylic paint. If gold acrylic covers, we obtain here are the flowers. Accessories for  2 handles and 4 loops. Twine for a loop. We put all the work cloth and glue along the contour. glue previously harvested flowers. With the tissue of flagella spread pattern. Inside, too, paste cloth. Then all the empty spaces filled eggshells. On the cover put a pen. It looks like the cover. All work acrylic paint black paint and light touches of acrylic cover with gold. Inside, he painted and covered with gold. The entire circuit is framed with string. And at the end of the product covered all acrylic lacquer. And once again the result in front of you. So it opens. View from above. Side view.All many thanks for your attention. Hope is not lost in vain time, visiting my guest. I wish you all success and creative discoveries. See you soon

Round frame mirror made of cardboard

round frame 13

Greetings, friends! I present to your attention another master-class on the creation of decorative frames made of cardboard, prepared by a great expert in this matter.This time Marina tell you how to make a round frame for a mirror . The new workshop will undoubtedly enrich your perception of cardboard and corrugated board within the possibilities of a whole. And following the laid down in it hints and tips, you will be able to do with their hands delicious interior decoration – for the joy yourself and loved ones.

Materials and tools:

– Three-layer corrugated board thickness of 0.4-0.6 cm
– soft corrugated board (dual-layer)
– color double layer micro corrugated: white, green, orange, brown
– a sheet of paper or thin cardboard (for the template)
– the color of the markers of micro, to paint sections (if necessary)
– the orange and green beads
– a pencil
– a compass
– stationery knife
– scissors –
dressmaker pins
– tweezers (for the convenience of placing strips and decorative elements)
– glue for cardboard (important the adhesive was of good quality and when dry – transparent)
– double sided tape
– a hook for the frame
– a round mirror (or photo)

 

1. Preparation of the frame .

I had two small mirrors, so for them, I decided to make beautiful frames. The size of the frame is determined based on the size of the mirrors or pictures (but note that the photo of the scope of this design then does not remove).

The diameter of my mirror – 20 cm Optimum width of field frames -. 6-7 cm , but you can do more. Thus, we need a circle of cardboard with a diameter of 20 + 7 + 7 = 34 cm .

We draw on the cardboard circle compass required diameter or, if there is no compass, draw out some round object of appropriate size. I found a lid on the pot diameter 35 cm.

We draw another concentric circle whose diameter is the diameter of the mirror.

From cardboard cut out a circle of 2-3, one (bottom) – a rear wall of the frame, one or two others made a circle with a truncated central part – the window for a mirror or picture.

On the back wall of the right anchoring hook (if it is inserted through the hole in the wall).

Check if our mirror included in the carved window to correct, if necessary. A number of cardboard circles with windows depend on the thickness of the mirror and cardboard thickness – mirror should be slightly pritopleno (pictured below mirror turned up the rear surface).

Merge layers of cardboard.

We make the outer edges of the frame. The process I have described in detail in previous workshops (for example here ), so I do not allow myself to repeat.

In short, this frame I pasted two glued strips of soft (two-layer) corrugated board. The width of the outer strip of the sum of the widths of all the layers of cardboard 0.6 cm (height and width of the inner rim strips). The lengths of the bars are equal to a circumference of the frame with a small allowance.

Then glue the mirror. One can choose different ways. I taped it to the double-sided tape, but you can use glue. If the frame is not to be used for the mirror, and for a photo or image, it is better, of course, is to use an adhesive tape. Once the mirror is glued, paste over the inside edges of the frame, as well as external – layer cardboard strips.

Already at this stage, you can start to decorate the frame of a different color, for example, paste a strip of double-layer micro color between the two strips of brown corrugated cardboard. I did not do it in this box but then plastered bordyurchiki and external, and the internal circles of orange and green strips of corrugated cardboard (below it will be seen).

I remind you that all the internal strips for edging and decoration should be the width of 0.6 cm .

2. Decorating frame .

This preparatory work is completed. Getting started decorating the inside of the frame. It is a creative process, and you can do it to your liking. I think that those who are engaged in a classic Quilling could well draw a frame in this technique because the paper is thinner and plastic and has greater opportunities for decoration.

Well, we, corrugated lovers will not be deflected to the side and remain loyal to our favorite material – corrugated cardboard. ?

The entire surface of the circle, I divided into 8 parts. This is easily done if you cut around template out of paper and put it on the layout. The same range of paper is useful for sketching.

Design, as a rule, undergoes changes in the course of 2-3 – this is normal.

For long curls, I snapped  (green, white, Kraft), length 22 cm , but you can make them a little less. If you have a different diameter of the box, specify the size of the elements on their own, according to the situation.

Adding 3 strips together, spin, first one way, then the other end turned in another direction. it is not necessary to glue together the strips as they are moved relative to each other, so they should be free when tightening. They just need to give the desired shape to make it easier to glue on the surface of the frame. Even better glue them individually, but I realized only then when all done.

Glue the curls at the scheduled place, causing a small amount of glue on the lower sections of cardboard strips. We make sure that the colors are arranged equally.

If you are going to use beads, immediately make curls on their size.

Here in the photo still curls in the original version, I later made changes and added more slips.

Making the petals. The order of colors from the center to the edge and their length: White – 7-7.5 cm , green – 8.5 cm , orange – 9.5 cm , white – 10.5 cm in the center, I taped green oblong beads.

If you do not have beads or you do not want to use them, you can leave the middle of a blank tab. Or you can make the roll, lightly dismiss it and flatten the edges so that it fills the space inside the petals.

Next, I filled all the remaining space in small curls of different shapes of gofropolosochek natural (brown) color, but when I looked a general view, I realized that something was missing. For a long time looking for the option you want, and finally realized that the main curls at me too tight. So I  even one green strip on both sides of each curl. Curls are wider and better look.

The remaining space on a frame, I filled the curls of any form of natural corrugated cardboard. And so I turned to the mirror frame.Good luck and inspiration!

Beautiful and simple cardboard chest

Chest out of cardboard 1

For storage of various household items, valuables, and other items used chest. From ancient times, people have become accustomed to such a container for storage. Produced most of the trunks of wood and decorated with various metallic elements. In the same master class, you will learn how to make a wonderful chest improvised with minimal cost.

Required Materials:
• Cardboard.
• PVA glue.
• Ducts of consumer paper.
• «Moment” glue.
• dressmaker pins.
• Decor.
• pliers.

Stages of manufactureOn any trunk box make markup. Cut.

• paste over the outside of the box main background, the space into about 6 cm.
On the long side of the trunk, layout attaches dressmaker pins flattened tubes as in the photo.

Now take a long strip of a different color. Secure the ends of the pins on the left side. Now do the weave, the distance can be taken equal to the width of the tube.

When depleting to the top, fold the ends of the strips and glue them inside. Here is the inside • While the glue dries, get the trunk lid. This MK bottle width equal to the width of the chest, so there is nothing to adjust the size is not necessary. Wet the cardboard and attach it to the bottle using adhesive tape. When the board is dry, it should be several times Procrit PVA glue. For greater reliability, you can glue the paper. • As long as dry cover, continue to braid the side of the trunk. Where should you need to build a strip? High lateral part is ready. Trim the excess from the strips and glue well. Continue to braid the trunk. Remember to stick to the bottom of the strip, the strip MK yellow. As a result of your labors get here is a neat and beautiful chest. We admire? Now continue to work. Edges to look neat and beautiful. The lid of the chest the same color as the trunk itself, going upstairs to 6 cm. Try to design converged smoothly. Arrange the cover as desired. Connect your imagination and forth. As a result of this work should be the following.But, of course, calls for a chest decoration. Be creative and create. Let things made with their own hands, endows you with kindness, beauty, and warmth.

How to make casket in a heart shape

CASKET IN A HEART SHAPE 1

Belt width 5,8sm, 40cm length, twisted on needle 1,5. tube paint for the eggs. Two coats of an acrylic clear coat. At the bottom of decoupage and varnish. Dimensions: 30 * 22 * 10.Businy wood. However, everything in order.

Well, something to help beginners. It said loudly, that it will be a master class. I share what I can. Photographer I useless. Well, what happened, what happened. So … cut to form two cartons

Measured basis, divide the desired distance between the stanchions. If you can not without a trace, corrects the distance. I got 1,8sm. Normally, less is better. Postpones 1.8, starting from the center of the “heart” It turned out this way … I prepare the paper and more … The paper pasted on cardboard with white glue and left to dry. A bit dry and put under load, so as not curled hours on 12. The process of bonding is not removed, fascinated.
While the bottom of a dry, paint tubes. Expanding to dry and leave everything until the morning. And in the morning for a surprise. That such a result is obtained. Apparently, the tubes were caught from different parties. I hope that will be enough of a color. Clay “Titan” pasting tube Top pasting the front of the bottoms. The process of gluing napkins too missed. Well, not all at once. Decoupage do with the file. I put the napkin “face” down at the file, pour some water into the center of a little and start to lift the edges to Vodicka gradually distributed on a napkin and no wrinkles. I add a little brush continue to keep raise for all parties. Try to keep the water before the time has not got to the edge (tear). When there is only the edge unglued, helping brush. When the napkin is flat, without wrinkles on the file, carefully poured the water and turn on the bedplate, smoothes. I remove the file from top to drip screed and PVA brush. Land. Yes! Two hearts are glued together, too, putting under pressure until it sets. It is better to wait a little longer. Clay grabbed. I begin to braid rope bottom of a single row. I lift the rack and begin to weave a rope in the two tubes. Get out of shape, that’s what happened. The result is not pleased with what’s nose turned out. It was necessary to equate the braid after varnishing. close: in front of the two, in the third It remains the last three tubes. The first of them is bent before the two and slips under the first rack start crisscrossing. Second-on rising: before the third and the inside of the first braided basket for the second braided out by drawing Fotik agreed to work only to that frame. I had to finish without him. And it is you! This beauty blossomed in my yard, and I am very pleased.

How to make quilling frame of cardboard

Quilling frame of cardboard with his own hands for a photo 1

Photo frames can be not only a good interior decoration, but also a wonderful gift close. They can be bought in any store or made from scrap materials with their own hands. The most available material, in this case, can be regarded as paper.

What would have been our quilling frame of cardboard with his own hands for a photo, we need a multi-colored cardboard, glue gun, glue PVA, stationery knife, paper quilling, quilling tool for.

We start with the fact that the inside of the draw colored cardboard the size of our future scope of the decor. Then take the knife and carefully cut the frame. Now we need to take the glue gun and glue together a piece of cardboard and a blank for the frame. Apply glue should be at the very edge of a board that had a place to put pictures. What’s more, plus the use of glue gun, it creates a small space between the sheets of cardboard, where he will continue to post pictures. Now you need to make a stand for the frame. To do this, take the cardboard and cut the shape out of it as shown in the photo. Bend the edge of the figure so as to remain within the middle of a width of about a centimeter. On the back of mid-Apply glue and glue the base to the frame. Now we can proceed to the decor, which is made in quilling techniques. To do this, we need to take a quilling tool. If you do not exist, it can be very easy to do out of the ordinary toothpicks. To do this, take a knife and carefully cut the edge of the toothpick. The tool is ready. Now we start to do the flowers for this we press the edge of the paper to the toothpick and turn loose circle. Then presses one edge of the circle to get a drop. This will be our petals. Do not forget to glue the edges of the paper PVA. With the help of glue, PVA collects flower of six petals and decorate the middle of a simple yellow circle. Sticking flower to the frame. Making other flowers. To do this, twist the loose circle, and then Fold the two edges up, pressing the middle inside. We supplement this flower with green leaves, drops and connect it with another flower strip of green paper. In the same way, we do the flower of a different color and fasten it at the top of the frame. Of the green paper, folded together a few times, do list, which is attached to the bottom of the flower and composition complement one another leaf and twig. We glued together several strips of green and fasten them to the bottom of the flower. Fold the branches, simulating the vine. Do not forget to capture all the glue. At the edge of the upper twigs fastened little flower from simple circles. The frame is ready. If you wish, you can complement the decor more details.

How to Make Photo Frame with Corrugated Cardboard

Photo frame with corrugated cardboard 1

You can easily create a photo frame using corrugated cardboard. It’s easy to do and inexpensive too!

Let’s say you bought something big for the house, quickly gutted the box, all unpacked, put and rejoice. Wait, wait, Now Smiles will be more!  see some of the corrugated cardboard? Well considered? Do not dispose of this, not the beauty of it may happen Well at least this frame

Learn to Make Photo Frame with Cardboard

This photo frame is made from corrugated cardboard, which gives it a unique texture and look. The frame is simple and stylish, and would be a great addition to any room. It’s also eco-friendly and recyclable, which is always a bonus. To make a photo frame with corrugated cardboard, you will need: -A piece of corrugated cardboard -A sharp knife -A ruler -A pencil

Learn to Make Photo Frame with Cardboard

First, outline the size and cut out the shape. With the line forming a fold line and fold in half frame

Learn to Make Photo Frame with Cardboard

Glue the side parts

the back of the frame glue support leg

If the frame is intended to be placed on the wall, you will need a loop. Pierce the cardboard and turn down the antennae inside the

Secure them with a piece of adhesive tape

Now glue the two parts of the frame

Prototyping knife chop the remaining cardboard into strips the width of 0.7 cm

make out the edges and the inside of the frame. The edges of the strips should be cut at an angle of 45 °

remaining strips to flatten

bending and twisting the strip in an arbitrary manner and is glued to the support surface

remains only suitable for framing pictures or picture (can be with glass)

How to Make Photo Frame with Corrugated Cardboard

Cardboard Box Activities & Crafts

A photo frame made out of corrugated cardboard that can be customized with different colors and designs.

A photo frame made out of corrugated cardboard is a great way to display your photos. You can customize the frame with different colors and designs to match your home decor. The frame is lightweight and easy to hang on your wall.

A corrugated cardboard photo frame that can be used as a bulletin board.

This corrugated cardboard photo frame is a great way to display pictures and also doubles as a bulletin board. Simply tack the frame to a wall or door and start decorating. It’s a perfect way to personalize your space and keep cherished memories on display.

A corrugated cardboard photo frame that can be used to display photos, artwork, or other memorabilia.

This corrugated cardboard photo frame is a great way to display photos, artwork, or other memorabilia. It’s easy to assemble and can be hung on a wall or displayed on a shelf. The frame is made of durable cardboard and has a clear plastic window that protects your photos or artwork. FAQs

What is the cardboard in a picture frame called?

The cardboard in a picture frame is called a mat. A mat is a piece of cardboard or paper that is used to highlight or emphasize a picture or other piece of artwork.

How do you make a picture frame out of cardboard?

To make a picture frame out of cardboard, you will need to cut a piece of cardboard to the desired size and shape. Next, you will need to cover the cardboard with fabric or paper. Once the fabric or paper is in place, you will need to glue it to the cardboard. Finally, you will need to add a hanger to the back of the frame so that it can be hung on a wall.

Do I leave the cardboard in the picture frame?

If you have a piece of cardboard that came with the frame, it is meant to be left in the frame. The cardboard helps to keep the frame sturdy and prevent it from warping.

Useful Resources

K4 Craft Kidpid Kids Art & Craft K4 Fashion