DIY: Safety pin feather jacket

artncraft

7 years ago

DIY Safety pin feather jacket

You’ll need:

1. Position the rhinestone chain on the back of your jacket. This will be the spine of the feather.

2. Draw a line where you want it to be.

3. Add a thin layer of E-6000 glue to the line

4. Place your chain on the glue and let it dry for about 1/2 hour.

5. Starting 5″ from the bottom of the chain, start adding safety pins evenly up each side. 6. Continue at an angle so that it looks like a feather.

7. Create a point at the top.

8. Add smaller safety pins at the base to create “fluff”.

I added 3 feathers to this jacket