Diwali Special Deepak Rangoli Design – Step By Step

Diwali Special Deepak Rangoli Design – Step By Step:

Beautiful Rangoli Design for Diwali – Step By Step

Beautiful Rangoli Design for Diwali – Step By Step Tutorial

How to make herringbone tunnel – Step By Step

I hope that, in spite of a few non-standard shape, our tunnel take root in their family)) Honestly, it was conceived as one of the demonstration models for the lesson … In the process of work, I crept into the idea that it can be used as a toy on Christmas tree school.

Required Material:

  • paper pastel A4 format (2 sheets);
  • watercolor paper A4 (3 sheets);
  • pencil;
  • metal ruler;
  • knife breadboard (I prefer to cut their paper only);
  • glue…

Dimensions pastel paper does not allow me to make a full scan of the sides of the tunnel … so … so … Drawing In the tunnel height of 16cm, width 15cm and 8cm glubina-

Like most of you, I spend soft easy on the fold lines with a knife … a bit … avoid creases when folded ….

Do … accordion intervals .s 19 (mm) x 10 (mm) x 10 (mm), -20 (mm) x 10 (mm) – 10 (mm), -20 (mm) x 10 (mm) x 10 (mm) -19 (mm) height … accordion must be less than (at least 8 mm) the height of the tunnel … a little again passers-by with a knife. There, where the diagram solid lines- the front side and the back where shtrihovye-.

Folding and gluing an accordion.

Now insert a few … they are drawn spontaneously

Getting to the assembly)) Glue the sides of the accordion.

To glue edges accordion inserts, in accordance with the planned composition.

Hope you like this herringbone tunnel.

Image Source: pinterest.com

We would love to hear your thoughts in the comment section below. And be sure to like us Facebook for more ideas!

Thank you for visiting our website. Keep Creating with Art & Craft!

How to make Eco-friendly Ganesh Idol at Home

Ganesha is a much-loved God and making him out of clay is such fun! Here’s an easy, step-by-step tutorial for an eco-friendly Ganesh idol that you can make at home!

Indians celebrate Ganesh Chaturthi with great fervor and delight. Most of them bring Ganpati to their home. The Ganpati decoration at home begins well in advance. Traditionally made idols pose a threat to the environment. They cause lots of pollution and contaminate our water bodies. This year use eco-friendly materials to make Ganpati idol and non-toxic colors for decorating it.

Step by step instructions for making a Eco-friendly clay Ganesha at home

Hope you enjoyed this step by step making of Ganesh idol at home. Do try making one for yourself. But, remember to use Eco-friendly, non-toxic clay.

Watch Videos to Learn and Make Quilling Ganesh Idol at Home

Hope you like these Eco-friendly Ganesh Idol step by step tutorials.

Image Source: Homemakeover

We would love to hear your thoughts in the comment section below. And be sure to like us Facebook for more ideas!

Thank you for visiting our website. Keep Creating with Art & Craft!

DIY: Valentine’s Day Rainbow Banner

This is a fun little rainbow banner for Valentine’s Day make with felt and string. Keep reading to see how to make it!

Required Material:

  • Squares of craft felt in rainbow colors
  • Bakers twine
  • Sewing machine or needle and thread
  • Scissors
  • Chalk
  • Heart cookie cutter
  • Batting
  • Pins
  • Start by tracing the heart shape onto a piece of felt folded in half

After it has been traced with chalk, pin the middle to keep both sides together.

Cut out your hearts. Keep the pins in. Set pinned hearts aside.

Do the same with the other rainbow colors.

Now sew both pieces together along the edge in a extra wide stitch with contrasting thread. You could also handstitch these. Leave 2 inches open to add the batting.

Stuff the batting into the heart and sew up the last inch.

Do the same with the other colors (I only ended up making one of each color as opposed to the two I had cut out).

Thread some bakers twine into a embroidery needle and poke through the top end of one, threading it through to the other side. Make sure to put the hearts on in rainbow order.

Keep adding to the thread until they’re all on.

Hope you like this Rainbow Banner tutorial.

Image Source: momtastic

We would love to hear your thoughts in the comment section below. And be sure to like us Facebook for more ideas!

Thank you for visiting our website. Keep Creating with Art & Craft!

DIY Tutorial: Make Your Own Mini Boxy Makeup Bag

DIY today for creating this boxy mini makeup bag. Compact enough for your stylish purse but big enough to fit all your touch up supplies you may need for a party, evening out, or special event like a wedding.

If you’ve never worked with a zipper before, this will be a great project to learn on. I promise, it’s really easy!

Required Material:

Two coordinating fabric (one is preferably upholstery weight), Zipper, Coordinating thread, Pins, Sewing Machine, Scissors, Ruler

Steps:

1. Cut two pieces of each fabric choice. Each piece should be 5 1/2 x 9 1/2

2. Lay one of the outer fabrics face up on your table, and set the zipper on top, face down so the top edge meets the top edge of the fabric. Then lay one of your lining pieces right side down to meet the top edge as well.

3. Pin along that top edge so all three pieces are attached.

4. Baste with needle and thread and then sew with your zipper foot along that top edge. Move your outer fabric so it’s on the outside, right side up.

5. Now place the second lining fabric right side up on your table, then sandwich the pieces you just sewed in between, and finishing with the second outer piece right side down on top.

6. Pin, baste and sew with the zipper foot on the top edge like you did for the other side.

7. After sewing, iron the outer pieces flat, and then fold them together so the outer pieces are right side together and lining pieces sandwiching them.

8. Pin at the opposite side of the zipper and sew along that bottom edge.

9. Move the zipper to the middle, unzip it halfway and sew along those two sides, through the zipper (pinch the zipper together when you’re sewing through it).

10. Pinch each edge in and measure with your ruler 2 1/2 inches across.

11. Mark with a pen that line and then pin next to the it. Sew along the line you drew and then snip off the triangle end. Do the same for all four sides.

12. Fold it inside out, so the outer pieces are on top and you’re done!

Hope you like this tutorial.

Image by Liz Daly

We would love to hear your thoughts in the comment section below. And be sure to like us Facebook for more ideas!

Thank you for visiting our website. Keep Creating with Art & Craft!

How to Make Pumpkin Seeds Bouquet

Crafts from natural materials are perhaps the most favorite form of creativity in children of all ages. Working with natural materials retains heat and hands of the master and always carries a positive energy. Very beautiful crafts can be made from seashells, acorns, chestnuts, dried leaves, etc. But the most original, and at the same time easy to manufacture work can be obtained from the usual pumpkin seeds.

Pumpkin seeds – this is an easily accessible natural material to work with which it is possible at any time of the year. Pumpkin seeds can produce a wide variety of original crafts, such as floral bouquet. I bring to your attention a master class on making flowers of pumpkin seeds. These flowers turn out very beautiful and original, and most importantly – they are easy to make and do not require great physical and financial costs.

Required Material:

1. Pumpkin seeds;
2. Peas;
3. Silicone adhesive;
4. PVA glue;
5. Floral tape;
6. Hessian;
7. Wooden sticks;
8. cardboard sheet;
9. Jute yarn;
10. The compass;
11. Simple pencil;
12. Scissors;
13. Acrylic paint white;
14. Brush;
15. Ruler.

Before you begin, you must treat the burlap so that it becomes rigid and does not crumble. To this mix of PVA glue and water in a proportion of 50 to 50 and fully put in the sack solution. After that, the fabric should be dried and ironed. While dried burlap, let us direct manufacturer flowers. The basis for the colors to be a circle of cardboard. Using a compass draw a circle on the cardboard with a diameter of 6 cm., And cut it. Now take the pumpkin seeds and using a silicone adhesive or glue “Moment”, pasted them in a circle. Paste the seeds so that their sharp edge was on top. The first row of seeds prepared. Now just glue the seeds of the second row. Sunflower seeds in the second row should be staggered and overlapping with respect to the first row. Also, do the third and fourth rows of seeds.

The middle of the flower reserve not glued.

Now we turn over our flowered on the back side and glue have to this side of a row of seeds.

Since our bouquet will consist of three colors, then make three for flowers. Pumpkin seeds, which we used for the flower petals are not very beautiful yellowish tint, so we using white acrylic paint, paint them white. We leave flowers alone until they are completely dry. Until the paint is dry, we do not lose time in vain and will prepare two cardboard parts: a circle with a diameter of 6 cm, and lepestochek, the height of 7 cm, and width – 4 cm… The carton blanks are put on the pressed and dried burlap and encircle their contours. Circles will need to cut 3 pieces, and petals – 6 pieces.Next a burlap circle glue on the reverse side of a flower preform. And along the contour cut petals from burlap, we stuck jute thread. And now it’s time to prepare for the stems of flowers. To stem can be used straight branches of the tree, we took advantage of chopsticks for sushi. Take floristic tape green and completely wrapped with it every wand. If you do not have floral tape, you can use the corrugated paper. We make three identical stems. Now we collect our flowers. In the middle of the flower Do the workpiece hole and insert the stem into it ready. In the middle of the flower glue yellow peas, which for strength from above abundantly watered with white glue.

Also, instead of peas can be used dried corn kernels, buckwheat or grains of pepper.

And finally left to attach the petals to our flowers. Fasten them using floral tape or corrugated paper.

That’s all – flowers ready! It remains to put our bouquet in a vase. This original bouquet decorates any space, especially natural corner in the school or in kindergarten. Good luck and success!

Source: Chudesenka

Thank you for visiting our website. We seek to always bring the best for you.

Did you like the Tutorial ? Leave your comment.

DIY Paper Craft: Paper Gift Bags/Goody Bags

Paper gift bags are eco-friendly and hence everyone is promoting the use of paper bags. It can be a great gift box too for gifting small items in it.

However, very attractive handmade paper gift bag and box can be made at home itself. Below we shall make one such simple yet decorative gift box.

Required Material:

  • Colour sheet
  • Pencil
  • Ruler
  • Glue
  • Cutter
  • Decorative pearl laces and pearls
  • Scissors

Step by Step Procedure to Make Handmade Paper Gift Bag:

Have a look at this step by step video tutorial for making an paper gift bag.

Hope you like this cute paper gift bags tutorial.

Source: stylenrich

We would love to hear your thoughts in the comment section below. And be sure to like us Facebook for more ideas!

Thank you for visiting our website. Keep Creating with Art & Craft!

How to Make Quilling & Earbud Wall Hanging

Making DIY Wall decoration Ideas must include learning how to make Quilling and Earbud Wall Hanging. This beautiful Home decoration Idea using Quilling Art is something that every crafter must learn. Easy to make Do It Yourself Quilling Wall Decor ideas that can totally change the look and feel of the ambiance of your home, and give it a decorative appeal. This pretty Quilling and Earbud Wall Hanging also makes for a best out waste recycled craft idea that you can make with the most basic of craft supplies at your disposal.

This Quilling & Earbud wall hanging is simple to make if you watch the step by step tutorial.

Step 1: Grab Your Craft Supplies

The basic craft supplies that you need to make the Quilling and Earbud Wall Hanging are :

  • Color paper
  • Adhesive
  • Cotton Bud
  • Pencil
  • Quilling needle
  • Scissors
  • Quilling Strips
  • Cardboard
  • Cutter
  • Decorative mirrors
  • Glitter paper

Step 2: Make the Craft Base

Cut out circular cardboard measuring 15 cm in diameter. Make 3 such cardboard circles.

Place the circular cardboard on the colored paper and measure the paper accordingly, to cover the cardboard with it, using adhesive.

Step 3: Build Your Craft

Take a cardboard and cut out 3 strips measuring 4.5 x 35 cm respectively.

Make Multiple tear drop shaped Coils in orange and blue colors.

Now take a circular cardboard and paste the tear drop shaped coils in a flower like pattern with adhesive.

Place a small tight coil in the center.

Step 4: Color the Earbuds

Take a bunch of earbuds and paint them using different bright colors of your choice.

Use adhesive to paste the earbuds in between the space of the coils, forming a spike pattern.

Prepare the 3 circular cardboard base in the same way, using tear drop shaped coils in bright combinations and colorful earbuds.

Step 5: Make the Frame.

Take the Cardboard strips made earlier and paint them in black color. Let the paint dry.

Join the cardboard strips in a triangle shaped frame using adhesive.

Paste the three decorative Quilling Circular Cardboard on each corner of the Triangular cardboard frame.

Step 6: Decorate!

Now add some sparkly touch using decorative Mirrors and glitter sheet pieces, on the triangular cardboard frame.

Step 7: Your Craft Is Ready!

Watch full video tutorial here:

Hope you like this wall hanging tutorial.

We would love to hear your thoughts in the comment section below. And be sure to like us Facebook for more ideas!

Thank you for visiting our website. Keep Creating with Art & Craft!