DIY: Pineapple from the bottle

PINEAPPLE FROM THE BOTTLE 1

Material:
1.corrugated Paper,Glue,Bottle

– Upper lobes cut out a shape, a width of approximately 1.5 – 2 cm and a height of 7-8 cm. Sami scales width of 2 – 2.5 cm long and 9 centimeters folding is not necessarily in the middle, the best one the tip of the other shorter. Fold paper twist and stretch at the bend locations at once 2 halves. Inside, between them I have them stick together with glue droplet. If the scales are short, we will see the bottle and turn ugly. That begins wrapping the bottle in a checkerboard pattern. Top tip – do not tear off the label !!!! To bare the bottle very hard to stick (especially Italian crepe paper). Bad assistant with the paper and tape !!! Of course, if you use an ordinary crepe paper for school (I did a paper Christmas tree) is suitable glue pen and tape. The second pineapple glued Melt – quickly and accurately !!! Often, i.e. rows close to each other to stick is not necessary – it turns dumb Optionally, you can paint the finished pineapple marker And it is possible, and leaves from the bottom, “attach”. Beauty Get pineapple bottle low, a round. That such leaves I made soapstone pallet.

Simple and beautiful idea about felt hearts

Valentine made of felt with their hands 1

If you are watching this master class, then you think about exactly what you can do for Valentine felt his own hands. This card is very close to you will be pleased, because you do it with all your heart and with sincere intentions.

We prepare the following materials for valentines:

• felt red
• Cardboard white
• red and white pol busily
• White thread for embroidery
• silver paste
• curly scissors
• Pencil
• Eraser
• Paper
• scissors
• a piece of chalk
• glue gun

Identifying exactly what size will our hearts and cut a rectangle of the same size, which is folded in half. Draw a half heart on the part of the fold, so that eventually turned the heart of the whole two equal halves.

Take the white cardboard such size that in it together next two hearts already familiar size. Divide the cardboard pencil into two equal parts and then perform blunt scissors a ruler on the same line a little pushing. Eraser to erase the line from the pencil. Bend the cardboard on the sunken line. To place, the fold is putting heart so that it touched the edge of the pointed end. Encircles the template. Cut along the contour curly scissors except for folding seats. Trace the same pattern on a red chalk felt. Cut Felt heart, making the indentation of 0.7 mm from the edge of the chalk. That is, felt heart must be smaller than that of the cardboard blank. Departing should be the same. The edge of the felt heart processed loopy forked suture. First delaying loop in one direction and then in the opposite direction, thus penetrating the needle through the same hole. The cut edge of scissors curly decorates red pol bus NAMI. Then on top of sticking embroidered Felt heart and decorate the edge of the white pol bus NAMI. We place them one by one between the red. Silvery glue draws the word love. To this end, squeezing a bit of glue and stretch it in the right direction. After applying the adhesive must be dry. So we have made with their own hands Valentine, which remains the only sign and sends to the recipient.

Beautiful crafts with milk can

crafts with milk can 1

The milk can be used to make various handicrafts. We select a cue and step by step on how to make a cool item with the milk can. Whenever you have a can of milk at home, remove the label, rinse and let dry before starting any craft.

To make this suggestion it takes few materials, write down the list:

  • Hot glue;
  • colored wool;
  • Decorative details of wood;
  • 1 milk powder Can;
  • Satin ribbon.
    Read too:

How do crafts with cans

Recycling milk can

1.Once washed and sanitized milk can. Start winding the yarn ball by the length of the can, with the help of hot glue to the tips. 2.Then complete the paste also satin ribbon at the top and bottom to give a special touch. 3.Glue the decorations on the milk can, using hot glue. Allow to dry.
4.Use the can for different purposes 5.It can serve as pencil holders, such as flower pot or whatever your imagination desires.

How to make frame of salt dough

Frame made of salt dough with your hands 1

Life – a variety of colors with a variety of shades. Sometimes some things we are trying to forget, and more to him not to return, and some long and anxiously keep in our memory, returning to them again and again. Meanwhile, individual events deserve not only to live in our minds or in the pages of the album but also to ensure that proudly show off in a pleasant and fun framed, which will give your past even more joyful and positive emotions.

To learn how to make a frame from salt dough with your hands with steps, you now know.

Required Materials:

1.Muka wheat;
2.Sol;
3.Marco sunflower;
4. film;
5.from under the banks (or any other small capacity);
7.(thin and wide);
8. paint (red, orange, yellow a

Now we start making a frame with his hands:

1. Take the salt and flour. Mix them in equal proportions (1/4 cup). Add a little water to form a plastic mass.
2. Further, the obtained sausage dough do four, two of which must be slightly shorter than the second pair. 3. Push the sausage fingers, thus making them thinner. Thereafter applying them perpendicular to each other. 4. Take a toothpick and cut through the wavy pattern along the sides of the frame. 5. We reserve the photo frame in the window until the next day (so it dries and becomes hard). 6. Now wrapped with cling film surface on which we paint the picture frame. 7. squeezed from tubes of red, yellow, orange and white paint. 8. We take a broad brush and paint the frame in red color (occasionally damp brush in sunflower oil). 9. We look to have been painted over all the edges. 9. We look to have been painted over all the edges.
11. Wait until the frame is dry (for several days). To expedite the process, you can bring a table lamp.
12. Further, the thin brush set white spots along the wavy pattern. 13. After that, take the yellow paint and paint the petals of flowers. All the work is done. We are waiting for a couple of days, then you can paste a picture framed.

How to make notepad /templates

notepad 17

We need:
1. Felt hard matching colors
2. Hot gun
3. Flexible magnet
4. Ribbon
5. Scissors
6. Pen
7. Stained glass contour
8. A small notebook
9. A template (the ladies at the end of the post) Using the template cut out of felt right color detail.
In addition, cut out of felt a rectangle measuring 5.5 x 7.0 cm. Applied to BL knot itsy based notebook, pen outline space, which will host a ribbon On hot glue the ribbon to the back of the BL knot itsy, departing approximately 15 cm from the edge of the tape.The same hot glue gun parts cut from felt.
Wrapping the ribbon in front of a cat and glue it to the edge Blok not itsy. Wrap the handle to cut a rectangle out of felt and glue the resulting roll off. Not removing the handle (it’s easier), a roll of glue to the bottom of the cat figurines. Well, like, his legs … Glue a magnet behind BL knots itsy Stained loop draws the necessary details on the cat muzzle Tie a beautiful bow of ribbon on the side. It remains only to hang on to the ribbon notebook by sliding it under the cover of the tape: ALL! Our handsome ready! In the same way, I did the owl: Mignon:
Eyes moving, hair – pieces of chenille wire. These are fun and useful gifts turned out 🙂I give your templates:
SOVA CAT MINION TURTLE, to which my hands were not there yet, but maybe someone will like this option BL knot itsy: All masters on the upcoming holiday !!!

How to make a Beautiful Tissue Paper Flower

This tutorial shows how to make such pretty and realistic carnations from tissue paper. As well as beautiful decorations or gifts, these are perfect for weddings: make everlasting boutonnieres, table decorations and even bridal bouquets, and keep your wedding flowers forever as a memento of your special day.

You will need:

  • Tissue paper
  • Scissors
  • 2 large paper clips
  • Pipe cleaners (chenille stems) or floral wire
  • Coloured marker pen
  • Optional: floral wire, floral tape, wire cutters

Hope you like this paper flower tutorial.

We would love to hear your thoughts in the comment section below. And be sure to like us Facebook for more ideas!

Thank you for visiting our website. Keep Creating with Art & Craft!